AEG Washer L 75270 FL User Manual

WASHING MACHINE  
USER MANUAL  
L 75270 FL  
L 75470 FL  
L 75670 FL  
 
ENGLISH  
3
FOR PERFECT RESULTS  
Thank you for choosing this AEG product. We have created it to give you  
impeccable performance for many years, with innovative technologies that help  
make life simpler – features you might not find on ordinary appliances. Please spend  
a few minutes reading to get the very best from it.  
ACCESSORIES AND CONSUMABLES  
In the AEG webshop, you’ll find everything you need to keep all your AEG  
appliances looking spotless and working perfectly. Along with a wide range of  
accessories designed and built to the high quality standards you would expect, from  
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…  
Visit the webshop at:  
VISIT OUR WEBSITE FOR:  
- Products  
- Brochures  
- User manuals  
- Trouble shooter  
- Service information  
 
4
SAFETY INFORMATION  
Before the installation and use, read  
this manual carefully:  
• For your safety and the safety of your  
property  
• To help the environment  
• For the correct operation of the ap-  
pliance.  
Always keep these instructions with the  
appliance also if you move or give it to  
a different person.  
GENERAL SAFETY  
The manufacturer is not responsible if  
an incorrect installation and use causes  
damage.  
• Do not use the appliance for profes-  
sional use. The appliance is only for  
domestic use.  
• Do not change the specifications of  
this appliance. There is the risk of in-  
jury and damage to the appliance.  
• Do not put flammable products or  
items that are wet with flammable  
products in, near or on the appliance.  
Risk of explosion or fire.  
• Obey the safety instructions on the  
detergent packaging to prevent  
burns to eyes, mouth and throat.  
• Make sure that you remove all metal  
objects from the laundry. Hard and  
sharp material can cause damage to  
the appliance.  
CHILDREN AND VULNERABLE  
PERSON SAFETY  
• Do not let persons, children inclu-  
ded, with reduced physical sensory,  
reduced mental functions or lack of  
experience and knowledge use the  
appliance. They must have supervi-  
sion or instruction for the operation  
of the appliance by a person who is  
responsible for their safety.  
• Keep all packaging away from chil-  
dren. There is the risk of suffocation  
or injury.  
• Keep all detergents away from chil-  
dren.  
• Do not touch the glass of the door  
while a programme operates. The  
glass can be hot (only for front-load-  
ing appliances).  
• Keep children and pets away from  
the appliance when the door is open.  
• Before you close the appliance door,  
make sure that children and pets are  
not into the drum.  
• If the appliance has a child safety de-  
vice, we recommend to activate it.  
CARE AND CLEANING  
• Deactivate the appliance and discon-  
nect the mains plug from the mains  
socket.  
• Do not use the appliance without the  
filters. Make sure that the installation  
of the filters is correct. An incorrect  
installation causes water leakages.  
CHILD SAFETY DEVICE  
• When you activate this device, you  
cannot close the door. This prevents  
children or pets to be closed in the  
drum. To activate the device, turn it  
clockwise, until the groove is horizon-  
tal. To deactivate the device, turn it  
counterclockwise, until the groove is  
vertical.  
INSTALLATION  
• The appliance is heavy, be careful  
when you move it.  
• Do not transport your appliance with-  
out the transit bolts, you can damage  
 
ENGLISH  
5
internal components and cause leak-  
ages or malfunctions.  
• Always use a correctly installed  
shockproof socket.  
• Do not install and connect a dam-  
aged appliance.  
• Do not use multiple plugs and exten-  
sion cables. There is a risk of fire.  
• Make sure to remove all packaging  
and transport bolts.  
• Do not replace or change the mains  
cable. Contact the service centre.  
• Make sure that the mains plug is dis-  
connected from the mains socket  
during installation.  
• Only a qualified person must do the  
electrical installation, the plumbing  
and the installation of the appliance.  
This to prevent the risks of structural  
damage or injury.  
• Do not install or use the appliance  
where the temperature is less than 0  
°C.  
• When you install the appliance on a  
carpet floor, make sure that there is  
air circulation between the appliance  
and the carpet. Adjust the feet to  
have the necessary space between  
the appliance and the carpet.  
• Make sure not to cause damage to  
the mains plug and cable.  
• Connect the mains plug to the mains  
socket only at the end of the installa-  
tion. Make sure that there is access  
to the mains plug after the installa-  
tion.  
• Do not pull the mains cable to dis-  
connect the appliance. Always pull  
the mains plug.  
• Only for UK and Ireland. The appli-  
ance has a 13 amp mains plug. If it is  
necessary to change the fuse in the  
mains plug, use a 13 amp ASTA (BS  
1362) fuse.  
Permanent connection. To connect  
the appliance permanently, install a  
double-pole isolating switch between  
the appliance and the electricity sup-  
ply. It must have a minimum distance  
of 3 mm between the switch contacts  
and it must be the correct type for  
the necessary load. It must agree  
with the last electrical legislation. The  
switch must not break the yellow and  
green ground cable.  
Water connection  
• Do not connect the appliance with  
old hoses already used. Only use new  
hoses.  
• Make sure not to cause damage to  
the water hoses.  
• Do not connect the appliance to new  
pipes or pipes not used for a long  
time. Let the water flow for some mi-  
nutes, then connect the inlet hose.  
Only a qualified electrician must in-  
stall this type of device.  
• The first time you use the appliance,  
make sure that the water hoses and  
the couplings do not have leakages.  
DISCARD THE APPLIANCE  
1. Disconnect the mains plug from the  
mains socket.  
2. Cut off the mains cable and discard  
Electrical connection  
it.  
• Make sure that the appliance is  
earthed.  
• Make sure that the electrical informa-  
tion on the rating plate agrees with  
the power supply.  
3. Discard the door catch. This pre-  
vents children or pets to be closed  
in the appliance. There is a risk of  
suffocation (only for front-loading  
appliances).  
 
6
ENVIRONMENT CONCERNS  
• Always start a washing programme  
with the maximum load of laundry.  
• If necessary, use a stain remover  
when you set a programme with a  
low temperature.  
• To use the correct quantity of the de-  
tergent, check the water hardness of  
your domestic system  
PACKAGING MATERIALS  
Recycle the materials with the symbol  
.
Put the packaging in applicable con-  
tainers to recycle it.  
ECOLOGICAL HINTS  
To help the environment, use less water  
and energy, obey these instructions:  
• Set a programme without the pre-  
wash phase to wash laundry with nor-  
mal soil.  
IN THE INTEREST OF THE ENVIRONMENT  
• Connect the appliance to the FOUL  
system for the drain water. The sew-  
age works keeps the drain water for  
the treatment before to release safely  
it into a river. Do not connect this ap-  
pliance to the surface drain system of  
the water because it releases the  
drain water directly into a river or  
stream without a treatment and this  
can cause of pollution. Contact your  
local water authority to have more in-  
formation.  
consequences for the environment and  
human health, which could otherwise  
be caused by inappropriate waste  
handling of this product. For more  
detailed information about recycling of  
this product, please contact your local  
council, your household waste disposal  
service or the shop where you  
The symbol  
on the product or on its  
packaging indicates that this product  
may not be treated as household  
waste. Instead it should be taken to the  
appropriate collection point for the  
recycling of electrical and electronic  
equipment. By ensuring this product is  
disposed of correctly, you will help  
prevent potential negative  
purchased the product.  
 
ENGLISH  
7
TECHNICAL INFORMATION  
Dimensions  
Width / Height / Depth  
605 / 850 / 605 mm  
640 mm  
Total depth  
Electrical connection:  
Voltage  
230-240 V  
2200 W  
10 A  
Overall power  
Fuse  
Frequency  
50 Hz  
Level of protection against ingress of solid particles  
and moisture ensured by the protective cover, except  
where the low voltage equipment has no protection  
against moisture  
IPX4  
Water supply pressure  
Minimum  
Maximum  
0,5 bar (0,05 MPa)  
8 bar (0,8 MPa)  
Cold water  
1)  
Water supply  
Maximum load  
Spin speed  
Cotton  
7 kg  
Maximum  
1200 rpm (L 75270 FL)  
1400 rpm (L 75470 FL)  
1600 rpm (L 75670 FL)  
1)  
Connect the water inlet hose to a water tap with a 3/4'' thread.  
 
8
PRODUCT DESCRIPTION  
1
2
3
8
9
10  
4
5
11  
12  
6
7
Worktop  
Feet for the appliance level  
Water drain hose  
Water inlet valve  
1
2
3
4
5
6
7
8
Detergent dispenser  
Control panel  
Door handle  
9
Mains cable  
10  
11  
12  
Rating plate  
Transit bolts  
Drain pump  
Feet for the appliance level  
ACCESSORIES  
Spanner  
To remove the transit bolts.  
Plastic caps  
1
2
1
2
To close the holes on the rear side  
of the cabinet after the removal of  
the transit bolts.  
Anti-flood inlet hose  
To prevent possible leakage  
Plastic hose guide  
3
4
4
3
To connect the drain hose on the  
edge of a sink.  
 
ENGLISH  
9
CONTROL PANEL  
1
2
3
Economy  
Super Eco  
20 Min. - 3 kg  
Quick Intensive  
Jeans  
Cottons  
+ Prewash  
Extra Silent  
Synthetics  
+ Prewash  
Easy Iron  
Delicates  
Wool/Silk  
Curtains  
Rinse  
Spin/Drain  
Temp.  
On/Off  
10  
9
8
7
6
5
4
On/Off button  
Programme knob  
Display  
Time saving button  
Extra rinse button  
Stain button  
1
2
3
4
5
6
7
8
9
Start Pause button  
Delay start button  
Spin reduction button  
Temperature button  
10  
1
Press button  
ance again.  
to activate the appli-  
1
ON/OFF BUTTON  
Press this button to activate or deacti-  
vate the appliance. A tune sounds when  
the appliance is activated.  
The AUTO OFF function automatically  
deactivates the appliance to decrease  
energy consumption when:  
• After 5 minutes from the end of the  
washing programme. Refer to 'At the  
end of programme'.  
2
PROGRAMME KNOB  
4
Before press button  
, you do not  
Turn this knob to set a programme. The  
related programme indicator comes on.  
use the appliance for five minutes.  
3
DISPLAY  
A
B
C
D
The display shows:  
A
B
• The maximum temperature of the programme.  
• The default spin speed of the programme.  
1)  
'No Spin' and 'Rinse Hold' symbols.  
 
10  
2)  
C
The display symbols.  
Symbols  
Description  
Washing phase  
Rinse phases  
Spin phase  
Child lock  
You cannot open the appliance door when the symbol is on.  
You can open the door only when the symbol goes off.  
If the programme is completed but the symbol stays on:  
• There is water in the drum.  
• The 'Rinse Hold' function is on.  
Delay start  
D
• The programme time  
When the programme starts, the time decreases with steps of 1 minute.  
• The delay start  
When you press the delay start button, the display shows the delay start  
time.  
• Alarm codes  
If the appliance has a malfunction, the display shows alarm codes. Refer  
to 'Troubleshooting' chapter.  
• Err  
The display shows this message for some seconds if:  
– You set a function that is not applicable for the programme.  
– You change the programme while it operates.  
4
The indicator of the Start/Pause button  
flashes.  
When the programme is completed.  
1)  
2)  
Only available for Spin/Drain programme.  
The symbols appear on the display when the related phase or function is set.  
4
6
START/PAUSE BUTTON  
TIME SAVE BUTTON  
4
6
Press button  
programme.  
to start or interrupt a  
Press the button  
to decrease the  
programme duration.  
• Press one time to set 'Shortened du-  
ration' for items with daily soil.  
• Press two times to set 'Extra Quick'  
for items with almost no soil.  
5
DELAY START BUTTON  
5
Press button  
to delay the start of a  
programme from 30 minutes to 20  
hours.  
Some programmes accept only  
one of the two functions.  
 
ENGLISH  
11  
7
ACOUSTIC SIGNALS  
FUNCTION  
EXTRA RINSE BUTTON  
7
Press button  
to add rinsing phases  
You can hear the acoustic signals when:  
• You activate the appliance.  
• You deactivate the appliance.  
• You press the buttons.  
to a programme.  
Use this function for persons allergic to  
detergents and in areas where the wa-  
ter is soft.  
• The programme is completed.  
• The appliance has a malfunction.  
To deactivate/activate the acoustic  
8
STAIN BUTTON  
8
Press button  
to add the stain phase  
8
7
to a programme.  
signals, press button  
and button  
Use this function for laundry with hard  
stains to remove.  
When you set this function, put the  
at the same time for 6 seconds.  
If you deactivate the acoustic  
signals, they continue operate  
only when you press the buttons  
and when a malfunction occurs.  
stain remover into compartment  
.
This function increases the pro-  
gramme duration.  
This function is not available  
with a temperature lower than  
40° C.  
CHILD LOCK FUNCTION  
This function prevents children to play  
with the control panel.  
• To activate the function, press button  
9
SPIN BUTTON  
10  
9
and button  
at the same time  
Press this button to:  
until the display shows the symbol  
.
• To deactivate the function, press but-  
• Decrease the maximum speed of the  
spin phase when you set a pro-  
gramme.  
10  
9
ton  
and button  
at the same  
goes off.  
time until the symbol  
You can activate the function:  
The display shows only the spin  
speeds available with the set  
programme.  
• Before you press the Start/Pause but-  
4
• Deactivate the spin phase.  
ton  
: the appliance cannot start.  
• Activate the 'Rinse Hold' function.  
Set this function to prevent fabric  
creases. The appliance does not  
drain the water when the programme  
is completed.  
• After you press the Start/Pause but-  
4
ton  
, all the buttons and the pro-  
gramme knob are deactivated.  
PERMANENT EXTRA RINSE  
FUNCTION  
Spin phase is off.  
With this function you can keep the ex-  
tra rinse function permanently on when  
you set a new programme.  
'Rinse Hold' function is  
on.  
• To activate the function press button  
10  
TEMPERATURE BUTTON  
6
5
and button  
until the indicator of button  
• To deactivate the function press but-  
at the same time  
7
is on.  
10  
Press button  
temperature.  
to change the default  
6
5
ton  
and button  
at the same  
- -  
= cold water  
7
time until the indicator of button  
is off.  
 
12  
PROGRAMMES  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
Cottons  
95° - Cold  
White and coloured Wash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
cotton with normal  
soil.  
Rinses  
Long spin  
max. 7 kg  
EXTRA RINSE  
1)  
TIME SAVE  
Cottons + pre-  
wash  
95° - Cold  
White and coloured Prewash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
cotton with heavy  
soil.  
Wash  
Rinses  
Long spin  
max. 7 kg  
EXTRA RINSE  
1)  
TIME SAVE  
Extra Silent  
95° - Cold  
White and coloured Stop with water in STAIN  
cotton with normal  
soil.  
the drum  
Rinses  
Long spin  
EXTRA RINSE  
1)  
TIME SAVE  
max. 7 kg  
Synthetics  
60° - Cold  
Synthetic or mixed  
Wash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
fabric items with nor- Rinses  
mal level of soil.  
max. 4 kg  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
Synthetics + pre- Synthetic or mixed  
Prewash  
Wash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
wash  
fabric items with  
heavy soil.  
60° - Cold  
Rinses  
max. 4 kg  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
2)  
Synthetic fabric  
items with normal  
soil.  
Wash  
RINSE HOLD  
EXTRA RINSE  
TIME SAVE  
Easy Iron  
Rinses  
60° - Cold  
1)  
Short spin  
max. 4 kg  
Delicates  
40° - Cold  
Delicate fabrics as  
Wash  
SPIN REDUCTION  
RINSE HOLD  
STAIN  
acrylics, viscose, pol- Rinses  
yester items with  
normal soil.  
max. 4 kg  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
Wool / Silk  
40° - Cold  
Machine washable  
wool. Hand washa-  
ble wool and deli-  
cate fabrics with  
«hand washing» care  
symbol.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
Rinses  
Short spin  
max. 2 kg  
 
ENGLISH  
13  
Programme  
Temperature  
Type of load  
Cycle  
Functions  
max. weight of load description  
3)  
All fabrics  
Drainage of the  
water  
SPIN REDUCTION  
NO SPIN  
Spin / Drain  
The maximum load  
of the laundry is rela- Spin phase at the  
ted to the type of  
laundry.  
maximum speed.  
Rinse  
Hand washed items. Rinses  
Long spin  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
Curtains  
40° - Cold  
Set this programme Prewash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
to wash curtains. It  
adds automatically  
the prewash phase  
to clean the dust  
from the curtains.  
Do not put the de-  
tergent into the pre-  
wash compartment.  
max. 2 kg  
Wash  
4)  
Rinses  
Short spin  
Jeans  
60° - Cold  
All items in jeans.  
Jersey made items  
with hi-tech materi-  
als.  
Wash  
SPIN REDUCTION  
RINSE HOLD  
Rinses  
Short spin  
EXTRA RINSE  
1)  
TIME SAVE  
max. 7 kg  
Quick Intensive  
60°-40°  
Quick washing pro-  
Wash  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
gramme, to be used Rinses  
for lightly soiled  
white/fast coloured  
cottons and mixed  
fabrics.  
Long spin  
max. 5 kg  
20 min. - 3 kg  
40°-30°  
Cotton and synthetic Wash  
SPIN REDUCTION  
items with light soil  
or worn only one  
time.  
Rinses  
Short spin  
5)  
Mixed fabrics (cotton Wash  
and synthetic items). Rinses  
SPIN REDUCTION  
RINSE HOLD  
EXTRA RINSE  
Super Eco  
Cold  
max. 3 kg  
Long spin  
Cotton Econo-  
my  
60° - 40°  
White and fast col-  
oured cotton with  
normal soil.  
Wash  
SPIN REDUCTION  
NO SPIN  
RINSE HOLD  
STAIN  
EXTRA RINSE  
6)  
Rinses  
Long spin  
max. 7 kg  
1)  
if you press the button 6 two times (Super Quick function set), we recommend you to  
decrease the quantity of the load. It is possible to keep the full load but the washing results  
are not good.  
2)  
The wash and spin phase is soft to prevent the creases of the laundry. The appliance adds  
some rinses.  
 
14  
3)  
4)  
The default phase of the spin speed is related to cotton items. Set the spin speed. Make  
sure that it agrees with the laundry.  
Set this function to add rinses. With a low spin speed the appliance performs delicate rinses  
and a short spin.  
5)  
6)  
Set this programme to decrease the time and the consumption of energy and water.  
Set this programme to have a good washing results and decrease the energy consumption.  
The time of the washing programme is extended.  
CONSUMPTION VALUES  
1)  
Energy consumption  
Water consump-  
Programme  
2)  
2)  
(KWh)  
tion (litre)  
White Cottons 95 °C  
Cottons 60 °C  
Cottons 40 °C  
Synthetics 40 °C  
Delicates 40 °C  
Wool/ Handwash 30 °C  
1)  
2.4  
1.5  
73  
69  
69  
48  
58  
57  
0.90  
0.55  
0.65  
0.35  
Refer to the display for the programme time.  
2)  
The consumption information shown in this chart is indicative. It can vary depending on the  
quantity and the type of laundry, on the temperature of the water supply and on the  
ambient temperature.  
are the most efficient programmes in  
Standard programmes for the  
Energy Label consumption  
values  
terms of combined energy and water  
consumption for washing that type of  
cotton laundry.  
They agree with EN60456.  
The cotton 60 °C economy and cotton  
40 °C economy are the standard cotton  
programmes for normally soiled cotton  
laundry. They are suitable to clean nor-  
mally soiled cotton laundry and they  
The actual water temperature  
may differ from the declared cy-  
cle temperature.  
 
ENGLISH  
15  
BEFORE FIRST USE  
1. To activate the drain system, put 2  
detergent dispenser. Set and start  
a programme for cotton at the  
highest temperature without laun-  
dry. This removes all possible dirt  
from the drum and the tub.  
litre of water in the main wash com-  
partment of the detergent dispens-  
er.  
2. Put a small quantity of detergent in  
the main wash compartment of the  
USING THE APPLIANCE  
1. Open the water tap.  
5. Use the correct quantity of deter-  
gent and additives.  
2. Connect the mains plug to the  
mains socket.  
6. Set and start the correct pro-  
gramme for the type of laundry and  
soil.  
3.  
1
Press button  
pliance.  
to activate the ap-  
4. Put the laundry in the appliance.  
LOADING THE LAUNDRY  
1. Open the appliance door.  
Make sure not to put too much  
laundry in the drum.  
3. Close the door.  
2. Put the laundry in the drum, one  
item at a time. Shake the items be-  
fore you put them in the appliance.  
Make sure that no laundry stays be-  
tween the seal and the door. There is a  
risk of water leakage or damage to the  
laundry.  
 
16  
FILLING THE DETERGENT AND ADDITIVES  
The detergent compartment for the prewash phase and the soak  
programme.  
Add the detergent for prewash and soak before the start of the  
programme.  
The detergent compartment for the washing phase.  
If you use a liquid detergent, put it immediately before you start  
the programme.  
Liquid additives compartment (fabric conditioner, starch).  
Put the product in the compartment before you start the pro-  
gramme.  
This is the maximum level for the quantity of liquid additives.  
The compartment for the stain remover.  
Put the product in the compartment and set the stain function be-  
fore you start the programme.  
Flap for powder or liquid detergent  
Turn it (up or down) in the correct position to use powder or liquid  
detergent.  
Always obey the instructions that you find on the packaging of the deter-  
gent products.  
Check the position of the flap  
1. Pull out the detergent dispenser  
until it stops.  
2. Press the lever down to remove the  
dispenser.  
 
ENGLISH  
17  
3. To use powder detergent, turn the  
flap up.  
4. To use liquid detergent, turn the  
flap down.  
With the flap in the position  
DOWN:  
– Do not use gelatinous or thick  
liquid detergents.  
– Do not put more liquid deter-  
gent than the limit showed in  
the flap.  
– Do not set the prewash  
phase.  
– Do not set the delay start  
function.  
5. Measure out the detergent and the  
fabric conditioner.  
6. Carefully close the detergent dis-  
penser. Make sure that the flap  
does not cause a blockage when  
you close the drawer.  
SETTING AND STARTING A PROGRAMME  
1. Turn the programme knob. The re-  
INTERRUPT A PROGRAMME  
lated programme indicator comes  
on.  
1.  
4
Press button  
flashes.  
. The indicator  
2.  
4
The indicator of button  
with red colour.  
flashes  
2.  
4
Press button  
again. The wash-  
ing programme continues.  
3. The display shows the default tem-  
perature and spin speed. To  
change the temperature and/or the  
spin speed, press the related but-  
tons.  
4. Set the available functions. The in-  
dicator of the set function comes  
on or the display shows the related  
symbol.  
CANCEL A PROGRAMME  
1.  
1
Press button  
to cancel the pro-  
gramme and to deactivate the ap-  
pliance.  
2.  
1
Press button  
again to activate  
the appliance. Now, you can set a  
new washing programme.  
5.  
4
Press button  
to start the pro-  
gramme. The indicator of button  
The appliance does not drain  
the water.  
4
is on.  
 
18  
2.  
3.  
5
Press button  
again and again  
CHANGE A FUNCTION  
until the display shows 0’.  
You can change only some functions  
before they operate.  
4
Press button  
starts.  
. The programme  
1.  
4
Press button  
flashes.  
. The indicator  
OPEN THE DOOR  
2. Change the function set.  
While a programme or the delay start  
operates, the appliance door is locked.  
SET THE DELAY START  
To open the appliance door:  
1.  
5
Press button  
again and again  
1.  
4
Press button  
. The door lock  
until the display shows the number  
of minutes or hours. The related  
symbols comes on.  
symbol in the display goes off.  
2. Open the appliance door.  
3. Close the appliance door and press  
2.  
4
Press button  
, the appliance  
4
button  
. The programme or the  
starts the countdown of the delay  
start.  
delay start continues.  
When the countdown is comple-  
ted, the programme starts auto-  
matically.  
If the temperature and level of  
the water in the drum are too  
high, the door lock symbol stays  
on and you cannot open the  
door. To open the door do the  
steps that follow:  
4
Before you press button  
to  
start the appliance, you can can-  
cel or change the set of the de-  
lay start.  
1. Deactivate the appliance.  
2. Wait for some minutes.  
You cannot set the delay start  
with the Steam programme.  
3. Make sure that no water is  
in the drum.  
CANCEL THE DELAY START  
If you deactivate the appliance,  
it is necessary to set the pro-  
gramme again.  
1.  
4
Press button  
cator flashes.  
. The related indi-  
AT THE END OF THE PROGRAMME  
• The appliance stops automatically.  
• The acoustic signals operate.  
• Remove the laundry from the appli-  
ance. Make sure that the drum is  
empty.  
• Keep the door ajar, to prevent mil-  
dew and odours.  
In the display  
comes on.  
• The indicator of the Start/Pause but-  
4
ton  
goes off.  
• Close the water tap.  
• The door lock symbol goes off.  
The washing programme is  
completed, but there is water in the  
drum:  
– The drum turns regularly to prevent  
the creases in the laundry.  
– The door stays locked.  
– You must drain the water to open the  
door.  
1
Press button  
to deactivate the ap-  
pliance. After five minutes from the  
end of the programme, the energy  
saving function automatically deacti-  
vates the appliance.  
When you activate the appli-  
ance again, the display show the  
end of the last set programme.  
Turn the programme knob to  
set a new cycle.  
 
ENGLISH  
19  
To drain the water:  
4. Deactivate the appliance.  
The appliance drain and spin  
1. If necessary, decrease the spin  
speed.  
automatically after approximate-  
ly 18 hours.  
2.  
4
Press the Start/Pause button  
.
The appliance drain the water and  
spin.  
3. When the programme is comple-  
ted and the door lock symbol goes  
off, you can open the door  
 
20  
HELPFUL HINTS AND TIPS  
THE LAUNDRY LOAD  
DETERGENTS AND ADDITIVES  
• Divide the laundry in: white, col-  
oured, synthetics, delicates and wool.  
• Only use detergents and additives  
specially made for washing machines.  
• Obey the washing instructions that  
are on the laundry care labels.  
• Do not mix different types of deter-  
gents.  
• Do not wash together white and col-  
oured items.  
• Some coloured items can discolour  
with the first wash. We recommend  
that you wash them separately for the  
first times.  
• To help the environment, do not use  
more than the correct quantity of de-  
tergent.  
• Obey the instructions that you find  
on the on packaging of these prod-  
ucts.  
• Button up pillowcases, close zippers,  
hooks and poppers. Tie up belts.  
• Empty the pockets and unfold the  
items.  
• Use the correct products for the type  
and colour of the fabric, the pro-  
gramme temperature and the level of  
soil.  
• If you use liquid detergents, do not  
set the prewash phase.  
• If your appliance has not the deter-  
gent dispenser with the flap device,  
add the liquid detergents with a dos-  
ing ball.  
• Turn inside out multilayered fabrics,  
wool and items with painted illustra-  
tions.  
• Remove hard stains.  
• Wash with a special detergent heavy  
soil stains.  
• Be careful with the curtains. Remove  
the hooks or put the curtains in a  
washing bag or pillowcase.  
• Do not wash in the appliance :  
– Laundry without hems or with cuts  
– Underwired bras.  
– Use a washing bag to wash small  
items.  
• A very small load can cause balance  
problems with the spin phase. If this  
occurs, adjust manually the items in  
the tub and start the spin phase  
again.  
WATER HARDNESS  
If the water hardness in your area is  
high or moderate, we recommend that  
you use a water softener for washing  
machines. In areas where the water  
hardness is soft it is not necessary to  
use a water softener.  
To know the water hardness in your  
area, contact your local water authority.  
Obey the instructions that you find on  
the packaging of the products.  
Equivalent scales measure the water  
hardness:  
• German degrees (°dH).  
• French degrees (°TH).  
STUBBORN STAINS  
• mmol/l (millimol for each litre - inter-  
national unit for the hardness of wa-  
ter).  
For some stains, water and detergent is  
not sufficient.  
We recommend that you remove these  
stains before you put the items in the  
appliance.  
• Clarke degrees.  
Special stain removers are available.  
Use the special stain remover that is ap-  
plicable to the type of stain and fabric.  
 
ENGLISH  
21  
Water hardness table  
Water hardness  
Level  
Type  
°dH  
0-7  
°T.H.  
mmol/l  
0-1.5  
Clarke  
0-9  
1
2
3
4
soft  
0-15  
16-25  
26-37  
> 37  
medium  
hard  
8-14  
15-21  
> 21  
1.6-2.5  
2.6-3.7  
>3.7  
10-16  
17-25  
>25  
very hard  
 
22  
CARE AND CLEANING  
WARNING!  
CAUTION!  
Do not use alcohol, solvents or  
chemical products.  
Disconnect the appliance from the  
mains supply before you clean it.  
MAINTENANCE WASH  
With the low temperature programmes  
it is possible that some detergent stays  
in the drum. Make regularly a mainte-  
nance wash. To do this:  
• Empty the laundry from the drum.  
• Set the hottest cotton wash pro-  
gramme  
• Use a correct quantity of powder de-  
tergent with biological properties.  
After each wash, keep the door open  
for a while to prevent mould and to let  
unpleasant smells go out.  
DESCALING  
The water we use contains limescale. If  
it becomes necessary, use a water soft-  
ener to remove limescales.  
Use a special product made for wash-  
ing machines. Obey the instructions  
that you find on the packaging of the  
manufacturer.  
Do this separately from the laundry  
wash.  
EXTERNAL CLEANING  
Clean the appliance only with soap and  
warm water. Fully dry all the surfaces.  
DOOR SEAL  
Regularly examine the seal and remove  
all objects from the inner part.  
• Clean the drum with special product  
for stainless steel.  
• Start a short programme for cotton at  
the maximum temperature with a  
small quantity of detergent.  
DRUM  
Regularly examine the drum to prevent  
limescale and rust particles.  
Only use special products to remove  
rust particles from the drum.  
To do this:  
 
ENGLISH  
23  
DETERGENT DISPENSER  
To clean the dispenser:  
1. Press the lever.  
2. Pull the dispenser out.  
1
2
3. Remove the top part of the liquid  
additive compartment.  
4. Clean all the parts with water.  
5. Clean the dispenser recess with a  
brush.  
6. Put back the dispenser in the re-  
cess.  
WARNING!  
DRAIN PUMP  
1. Disconnect the mains plug  
Regularly examine the drain  
pump and make sure that it is  
clean.  
from the mains socket.  
2. Do not remove the filter  
while the appliance oper-  
ates. Do not clean the drain  
pump if the water in the ap-  
pliance is hot. The water  
must be cold before you  
clean the drain pump.  
Clean the pump if:  
• The appliance does not drain the wa-  
ter.  
• The drum cannot turn.  
• The appliance makes an unusual  
noise because of the blockage of the  
drain pump.  
• The display shows an alarm code be-  
cause of the problem with water  
drain.  
 
24  
To clean the drain pump:  
1. Open the drain pump door.  
2. Pull the flap out to remove it.  
3. Put a container below the recess of  
the drain pump to collect the water  
that flows out.  
4. Press the two levers and pull for-  
ward the drainage duct to let the  
water flow out.  
5. When the container is full of water,  
put the drainage duct back again  
and empty the container. Do steps  
4 and 5 again and again until no  
more water flows out from the  
drain pump.  
1
6. Pull back the drainage duct and  
turn the filter to remove it.  
2
7. Remove fluff and objects from the  
pump.  
8. Make sure that the impeller of the  
pump can turn. If this does not oc-  
cur, contact the service centre.  
 
ENGLISH  
25  
9. Clean the filter under the water tap  
and put it back in the pump into  
the special guides.  
2
10. Make sure that you tighten correct-  
ly the filter to prevent leakages.  
11. Put the flap back and close the  
drain pump door.  
1
4
The indicator of button  
flashes  
THE INLET HOSE FILTER AND  
THE VALVE FILTER  
and the display shows the related  
alarm. Refer to 'Troubleshooting'.  
It could be necessary to clean the filters  
when:  
• The appliance does not fill with wa-  
ter.  
WARNING!  
Disconnect the mains plug from  
the mains socket.  
• The appliance fills with the water for  
a long time.  
To clean the water inlet filters:  
1. Close the water tap.  
2. Remove the water inlet hose from  
the water tap.  
3. Clean the filter in the inlet hose  
with a stiff brush.  
4. Remove the inlet hose behind the  
appliance.  
5. Clean the filter in the valve with a  
stiff brush or a towel.  
6. Install again the inlet hose. Make  
sure that the couplings are tight to  
prevent leakages.  
7. Open the water tap.  
45°  
35°  
If necessary, clean the pump.  
Put the drainage duct back and close  
the drain pump flap.  
EMERGENCY DRAIN  
Because of a malfunction, the appliance  
cannot drain the water.  
If this occurs, do steps (1) through (6) of  
'To clean the drain pump'.  
 
26  
When you drain the water with the  
emergency drain procedure, you must  
activate again the drain system:  
1. Put 2 litres of water in the main  
wash compartment of the deter-  
gent dispenser.  
2. Close the water tap.  
3. Remove the water inlet hose  
4. Put the two ends of the inlet hose  
in a container and let the water  
flow out of the hose.  
5. Empty the drain pump. Refer to the  
2. Start the programme to drain the  
emergency drain procedure  
water.  
6. When the drain pump is empty, in-  
stall the inlet hose again.  
FROST PRECAUTIONS  
WARNING!  
If the appliance is installed in an area  
where the temperature can be less than  
0 °C, remove the remaining water from  
the inlet hose and the drain pump.  
Make sure that the temperature  
is more than 0 °C before you  
use the appliance again.  
The manufacturer is not respon-  
sible for damages caused by  
low temperatures.  
1. Disconnect the mains plug from the  
mains socket.  
 
ENGLISH  
27  
TROUBLESHOOTING  
The start of the appliance does not oc-  
- The appliance does not drain  
the water.  
- The appliance door is open or  
not closed correctly.  
cur or it stops during operation.  
First try to find a solution to the prob-  
lem (refer to the table). If not, contact  
the service centre.  
- The anti-flood device is on.  
With some problems, the acoustic  
signals operate and the display  
shows an alarm code:  
WARNING!  
Deactivate the appliance before  
you do the checks.  
- The appliance does not fill  
with water.  
Problem  
Possible cause  
Possible solution  
The appliance  
does not fill with  
water.  
The water tap is closed.  
Open the water tap.  
The water inlet hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
The filters in the water in- Clean the filters. Refer to 'Care  
let hose is blocked . and cleaning'.  
The water tap is blocked Clean the water tap.  
or is furred with lime-  
scale.  
The connection of the  
water inlet hose is not  
correct.  
Make sure that the connection is  
correct.  
The water pressure is too Contact your local water authori-  
low.  
ty.  
The appliance  
does not drain the damaged.  
water.  
The water drain hose is  
Make sure that the water drain  
hose has no damages.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
The connection of the  
water drain hose is not  
correct.  
Make sure that the connection is  
correct.  
A washing programme  
without the drain phase  
is set.  
Set the drain programme.  
The function Rinse &  
Hold is on.  
Set the drain programme.  
Close the door correctly.  
The appliance  
door is open or  
not closed correct-  
ly.  
 
28  
Problem  
Possible cause  
Possible solution  
The anti-flood de-  
vice is on.  
• Disconnect the appliance.  
• Close the water tap.  
• Contact the service centre.  
The spin phase  
does not operate.  
The spin phase is off.  
Set the spin programme.  
The filter of the drain  
pump is blocked.  
Clean the filter of the drain  
pump. Refer to 'Care and clean-  
ing'.  
Balance problems with  
the laundry load.  
Adjust manually the items in the  
tub and start the spin phase  
again.  
The programme  
does not start.  
The mains plug is not  
connected in the mains  
socket.  
Put in the mains plug.  
Blow out fuse in the  
household fuse box.  
Replace the fuse.  
You did not press button  
4
Press button  
.
4
.
The delay start is set.  
To start immediately the pro-  
gramme, cancel the delay start.  
The Child Lock function  
is activated.  
Deactivate the Child Lock func-  
tion.  
There is water on  
the floor.  
Leakages from the cou-  
plings of the water ho-  
ses.  
Make sure that the couplings are  
tight.  
Leakages from the drain Make sure that the drain pump  
pump.  
filter is tight.  
The water drain hose is  
damaged.  
Make sure that the water inlet  
hose has no damages.  
You cannot open  
the appliance  
door.  
The washing programme Let the washing programme end.  
is in operation.  
There is water in the  
drum.  
Set the drain or the spin pro-  
gramme.  
The appliance  
makes an unusual pliance.  
noise.  
Incorrect level of the ap- Adjust the level of the appliance.  
Refer to 'Installation'.  
You did not remove the  
packaging and/or the  
transit bolts.  
Remove the packaging and/or  
the transit bolts. Refer to 'Instal-  
lation'.  
The load is very small.  
Add more laundry in the drum.  
 
ENGLISH  
29  
Problem  
Possible cause  
Possible solution  
The appliance fills The end of the drain  
Make sure that the drain hose is  
in the correct position.  
with water and  
hose is too low.  
drain immediately.  
The washing re-  
The detergent you used Increase the detergent quantity  
sults are not satis- was not sufficient or cor- or use a different one.  
factory.  
rect.  
You did not remove the  
stubborn stains before  
you wash the laundry.  
Use special products to remove  
the stubborn stains.  
Incorrect temperature  
was set.  
Make sure that you set the cor-  
rect temperature.  
Too much laundry load.  
Decrease the laundry load.  
After the check, activate the appliance.  
The programme continues from the  
point of interruption.  
If the display shows other alarm codes,  
contact the service centre.  
If the problem occurs again, contact the  
service centre.  
 
30  
INSTALLATION  
UNPACKING  
1. Use the gloves. Remove the exter-  
nal film. If necessary, use a cutter.  
2. Remove the cardboard top.  
3. Remove the polystyrene packaging  
materials.  
4. Remove the internal film.  
5. Open the door. Remove the poly-  
styrene piece from the door seal  
and all the items from the drum.  
 
ENGLISH  
31  
6. Put the front piece on the floor be-  
hind the appliance. Carefully put  
down the appliance with the rear  
side on it. Make sure not to dam-  
age the hoses.  
7. Remove the polystyrene protection  
from the bottom.  
8. Pull up the appliance in vertical po-  
sition.  
1
2
9. Remove the power supply cable  
and the drain hose from the hose  
holders.  
10. Remove the three bolts. Use the  
key supplied with the appliance.  
11. Pull out the plastic spacers.  
 
32  
12. Replace the plastic spacers with  
the plastic caps. You can find these  
caps in the user manual bag.  
WARNING!  
We recommend that you keep  
the packaging and the transit  
bolts for when you move the ap-  
pliance.  
Remove all the packaging and  
the transit bolts before you in-  
stall the appliance.  
POSITIONING AND LEVELLING  
• Install the appliance on a flat hard  
floor.  
• Make sure that carpets do not stop  
the air circulation below the appli-  
ance.  
• Make sure that the appliance does  
not touch the wall or other units  
• Loosen or tighten the feet to adjust  
the level. A correct adjustment of the  
appliance level prevents the vibra-  
tion, noise and the movement of the  
appliance when in operation.  
x4  
• The appliance must be level and sta-  
ble.  
CAUTION!  
Make sure that there is sufficient  
access after the installation for  
possible repairs by a qualified  
person.  
Do not put cardboard, wood or  
equivalent materials below the  
appliance feet to adjust the lev-  
el.  
 
ENGLISH  
33  
tach it to the beams of the floor with  
minimum 2 screws.  
Installation on a not hard floor  
When you install the appliance on a not  
hard floor (wooden planks floor), put a  
rigid support plinth under the appli-  
ance feet to prevent the noise and the  
vibration.  
Assemble the plinth with a waterproof  
wood panel (min. 15 mm thick) and at-  
The plinth must extend of some cm  
more than the edges of the appliance.  
We recommend you to install the appli-  
ance in one of the corners of the room,  
where the floor is more stable.  
THE INLET HOSE  
• Connect the hose to the appliance.  
Turn the inlet hose only left or right.  
Loose the ring nut to set it in the cor-  
rect position.  
45O  
35O  
• Connect the water inlet hose to the  
cold water tap with 3/4 thread.  
CAUTION!  
Make sure that there are no  
leaks from the couplings.  
Do not use an extension hose if  
the inlet hose is too short. Con-  
tact the service centre for the re-  
placement of the inlet hose.  
If you can not connect the water inlet  
hose to the cold water tap of the pri-  
mary hydraulic system, connect it to  
your domestic cold water storage sys-  
tem.  
Make sure not to have more than a dis-  
tance of 5.02 m (16.5 ft) between the  
appliance inlet hose and the bottom of  
the water storage tank.  
Water pressure  
The appliance works correctly if the wa-  
ter pressure is not less than 0.05 MPa  
(0.5 bar).  
 
34  
Water-stop device  
The inlet hose has a water stop device.  
This device prevents water leaks in the  
hose because of its natural ageing. The  
red sector in the window «A» shows this  
fault .  
If this occur, close the water tap and  
contact the service centre to replace  
the hose.  
A
WATER DRAINAGE  
There are different procedures to con-  
nect the drain hose:  
With the plastic hose guide.  
• On the edge of a sink.  
• Make sure that the plastic guide can-  
not move when the appliance drains.  
Attach the guide to the water tap or  
the wall.  
• To a stand pipe with vent-hole.  
Refer to the illustration. Directly into  
a drain pipe at a height of not less  
than 60 cm (23.6”) and not more than  
100 cm (39.3”). The end of the drain  
hose must always be ventilated , i.e.  
the inner diameter of the drainpipe  
(min. 38 mm — min. 1.5”) must be  
larger than the external diameter of  
the drain hose.  
 
ENGLISH  
35  
• If the end of the drain hose is this  
(see the drawing), you can push it di-  
rectly into the stand pipe.  
Without the plastic hose guide.  
• To a sink spigot.  
Refer to the illustration. Put the drain  
hose in the spigot and tighten it with  
a clip. Make sure that the drain hose  
makes a loop to prevent that remain-  
ing particles go in the appliance from  
the sink.  
• Directly to a built-in drain pipe in the  
room wall and tighten it with a clip.  
You can extend the drain hose  
to maximum 400 cm. Contact  
the service centre for the other  
drain hose and the extension.  
 
132939750-A-112011  
 

3M Music Mixer DL User Manual
Acer Network Card R300 User Manual
Addonics Technologies Computer Drive AD25MSD User Manual
AEG Dishwasher 44080 I User Manual
Allied Telesis Network Card AT A35 SX SC User Manual
American Audio DJ Equipment 250HP User Manual
Audiovox Car Stereo System ACC40 User Manual
Axis Communications Digital Camera AXIS 225FD User Manual
Bang Olufsen Microphone 711 User Manual
Behringer DJ Equipment 1002B User Manual