AEG Washer W 1030 User Manual

LAVAMAT W 1030  
Washing machine  
Instruction book  
 
Contents  
CONTENTS  
Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Environmental protection tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6
6
8
8
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Drawer for Detergent and Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
9
9
9
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Program Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Temperature Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
ON/OFF Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Consumption Data and Time Required . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Before Washing for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Prepare washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Sort washing and prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Washing Types and Care Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Detergent and conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Which detergent and conditioner? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
How much detergent and conditioner? . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Using Water Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Performing a Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Loading the Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Adding Detergent/Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Setting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Starting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Changing the Spin Speed or Selecting Rinse Hold . . . . . . . . . . . . . . . . . . . . 19  
During the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Washing Cycle Complete/Removing the Washing . . . . . . . . . . . . . . . . . . . . 20  
3
 
Contents  
Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Washing with a Pre Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Separate Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Separate Gentle Rinsing/Starching/Conditioning . . . . . . . . . . . . . . . . . . . 22  
Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Cleaning and Caring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Detergent drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Washing drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Fill-in door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
What to do when… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Perform emergency drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Clean the circulating pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Installation and Connection Instructions . . . . . . . . . . . . . . . . 30  
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Dimensions of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Front and Side Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Remove transportation protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Levelling on uneven floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
4
 
Contents  
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Water feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Hot and Cold Water Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Water drain-off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Delivery heights above 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Guarantee Conditions/Service Departments . . . . . . . . . . . . 39  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
5
 
OPERATING INSTRUCTIONS  
1 Safety  
The safety standards of AEG electric appliances are in keeping with the  
recognised rules of technology and the law governing the safety of  
appliances. Nevertheless as a manufacturer we are committed to famil-  
iarise you with the following safety instructions:  
Prior to initial start-up  
• Observe the "Installation and Connection Instructions" below in  
these user instructions.  
• If the appliance is delivered during the winter and temperatures are  
below freezing, allow the appliance to stand at room temperature for  
24 hours before operation  
Intended use  
• The washing machine is intended exclusively for the washing of nor-  
mal household washing in the home. If the appliance is used for pur-  
poses other than those intended, or if it is improperly operated, the  
manufacturer can assume no liability for damages which may occur.  
• Additions or modifications to the washing machine are strictly for-  
bidden due to safety reasons.  
• Use only those detergents which are suitable for the washing  
machine. Observe instructions provided by the detergent manufac-  
turer.  
• Laundry to be washed may not contain any flammable solvents. This  
must also be taken into consideration when washing pre-washed  
laundry.  
• Do not use the washing machine for dry-cleaning.  
• Dyes and bleaches may only be used in the washing machine if such  
use has been expressly endorsed by the manufacturer of these prod-  
ucts. We can assume no liability for damages which may occur.  
• Use tap water only. Rain water and industrial water may only be used  
if they fulfil requirements in accordance with DIN1986 and DIN1988.  
• Damage due to frost is not covered by the guarantee! If the washing  
machine is located in a room in which below freezing temperatures  
might occur, emergency draining must be carried out if danger of  
freezing occurs (see "Emergency Draining"). Furthermore, the inlet  
hose must be disconnected from the tap and laid on the floor.  
6
 
Operating instructions  
Safety of children  
Packaging materials (e.g. sheet and Styrofoam) can be dangerous for  
children. Danger of asphyxiation! Keep packaging materials at a safe  
distance from children.  
Children are often unable to recognise the dangers involved with  
electrical appliances. Provide for proper supervision during operation,  
and do not allow children to play with the washing machine the  
danger exists that a child might lock itself into the appliance.  
Make certain that children or small animals do not climb into the  
drum of the washing machine.  
If the washing machine needs to be disposed of, remove the mains  
plug, destroy the door lock, cut off the electrical cable and dispose of  
the plug and remaining cable separately. In this way children are pre-  
vented from locking themselves in and are not exposed life threaten-  
ing danger.  
General Safety  
Repairs to the washing machine may only be carried out by trained  
personnel. Improper repairs can give rise to significant hazards. If  
repairs are required, contact customer service or your dealer.  
Never use the washing machine if the mains cable is damaged or the  
control panel, the work surface, or the plinth are damaged to such an  
extent that components inside the machine are openly accessible.  
Switch off the washing machine before cleaning, maintenance and  
servicing. In addition, unplug from the mains or in the case of per-  
manent connection pull the circuit breaker, or completely remove  
screw type fuses.  
Never remove the mains plug by pulling on the cable. Always grip the  
plug.  
Multi-way plugs / connectors and extension cables must not be used.  
This could constitute a safety hazard!  
Do not clean the washing machine with a jet of water. There is a risk  
of electric shock!  
When high temperature washing programs are selected, the glass in  
the door becomes hot. Do not touch!  
Leave the water in the machine to cool down before performing an  
emergency drain or cleaning the circulation pump.  
Small animals may gnaw at electrical power cables and water hoses.  
There is a risk of electric shock and damage from water leaks! Keep  
small animals away from the washing machine.  
7
 
Operating instructions  
Disposal  
2
Dispose of the packaging!  
Dispose of washing machine packaging materials properly. All packag-  
ing materials are environmentally sound and can be safely disposed of,  
or burned in a refuse incineration plant.  
The plastic parts can be reused:  
The external plastic cover and the bags inside are made of polyethyl-  
ene (marking >PE<).  
The padding is made of CFC free expanded polystyrene  
(marking >PS<).  
Corrugated components are made from recycled paper and should be  
disposed of at a paper recycling station.  
Dispose of your old appliance!  
If, at some point in time, the service life of the appliance has expired,  
please take it to your nearest recycling centre, or to your appliance  
dealer, who will accept the old appliance for a minimal fee.  
2 Environmental protection tips  
No pre-wash is required for normally soiled washing. This saves you  
detergent, water and time (and is good for the environment!).  
If the indicated load capacities are taken full advantage of, the wash-  
ing machine is especially efficient.  
For small loads, use only one half to one third of the recommended  
detergent quantity.  
Stains and soiling confined to given areas can be removed by means  
of appropriate pre-treatment. You can then wash at lower tempera-  
tures.  
Wash lightly to medium soiled cottons with the energy saving pro-  
gram.  
Softeners are often not required. Try it! If you use a dryer, your wash-  
ing will be soft and fluffy, even without softeners.  
A water softener should be used for water within a hardness range of  
mid to high (as of hardness level II, see "Detergents and Condition-  
ers"). Detergent can then always be dosed for water hardness level I  
(= soft).  
8
 
Operating instructions  
Description of the Appliance  
Front View  
Drawer for  
detergent and  
softener  
Control Panel  
Rating plate  
(behind door)  
Door with  
handle  
Flap in front of the  
circulation pump  
Threaded feet  
(height adjustable)  
Drawer for Detergent and Conditioner  
Suction cap  
(must be firmly  
fitted)  
k
Pre wash detergent  
or in-wash stain  
treatment  
l
Main wash deter-  
gent  
(powder) and water  
softener if required  
w
Liquid conditioner  
(softener, finisher,  
starch)  
9
 
Operating instructions  
Control panel  
Spin Speed  
Button  
EASY-CARES  
Button  
Temperature Selector  
Program Selector  
ON/OFF  
Button  
RINSE HOLD  
Button  
Program Selector  
You define the type of washing  
cycle using the program selector.  
Important! Only turn the program  
selector clockwise!  
The various positions have the fol-  
lowing effect:  
COTTONS/LINEN, EASY-CARES (+button) Program Group  
For cottons/linen: You only need to set the program selector to the  
desired programme.  
For easy-care washing: Set the program selector to the desired pro-  
gramm and then also press the EASY-CARES button.  
STAIN  
Stain program for treating heavily soiled or stained washing with in-  
wash stain treatment.  
MAIN WASH  
Main washing cycle for normally soiled washing.  
QUICK WASH  
Shortened main washing cycle for lightly soiled washing.  
10  
 
Operating instructions  
RINSE  
Separate rinse, e.g. for rinsing hand washed fabrics (spinning in accord-  
ance with the selected washing type or rinse hold).  
Rinse hold means: the washing is left in the last rinse water, it is not  
spun.  
3
CONDITIONER  
Separate conditioning of wet cotton/linen or easy-care washing. This  
setting can also be used for separate starching and separate treatment  
of wet cotton/linen or easy-care washing. (1 rinse, liquid conditioner is  
washed in from the w compartment, spinning as per the programmes  
for cotton/linen or easy-care washing, or rinse hold.)  
SPIN  
Spinning after a rinse hold or separate spinning of hand washed cot-  
ton/linen or easy-care washing.  
DELICATES Program Group  
DELICATES  
Main washing cycle for delicates.  
SHORT SPIN  
Spin after a rinse hold, or separate short spin of hand washed delicates.  
WOOLLENS Program Group  
WOOL  
Main washing cycle for woollens and particularly delicate fabrics.  
GENTLE RINSE  
Separate short rinse, e.g. for rinsing hand washed fabrics or separate  
gentle rinsing of delicates or woollens. (1 rinse, liquid conditioner is  
washed in from the w compartment, short spin or rinse hold.)  
SHORT SPIN  
Spin after a rinse hold, or separate short spin of hand washed woollens  
or particularly delicate fabrics.  
PUMP OUT  
Pumps out the water after a rinse hold (without spinning).  
PRE WASH  
Pre wash (approx. 15 minutes, temperature limited to max. 40 °C) prior  
to the main washing cycle that follows automatically. PRE WASH can  
only be combined with COTTONS/LINEN and EASY-CARES.  
11  
 
Operating instructions  
Temperature Selector  
On the temperature selector you can set  
the temperature for the washing cycle;  
the temperature is continuously variable  
from COLD to 95 °C.  
E Position (Energy Saving): Energy saving  
program at approx. 67 °C for lightly to  
normally soiled cotton washing.  
2
ON/OFF Button  
This button is used to switch on the washing  
machine and start the selected program, or  
to switch off the washing machine.  
Consumption Data and Time Required  
The values given in the following table for selected programs were  
determined under standard conditions. They provide a useful guide for  
operation in the home.  
Hot and  
Cold Water  
Cold Water  
Connection  
Connection1)  
Tempe-  
rature  
Selector  
Water  
in  
Litres  
Program  
Selector  
Type of Load  
Washing in kg  
Button  
Energy Time Energy Time  
in  
in  
in  
in  
kWh Min. kWh Min.  
95  
Cottons  
5
5
59  
59  
1.80  
1.10  
119  
119  
1.00  
0.65  
119  
119  
Cottons/  
Linen  
602)  
MAIN-  
WASH  
Cottons/  
Linen  
40  
40  
5
59  
48  
0.60  
0.40  
119  
86  
0.60  
0.40  
119  
86  
EASY-  
CARES  
Easy-  
Cares  
2.5  
DELICATES  
WOOL  
30  
30  
Delicates 2.5  
Woollens  
57  
52  
0.45  
0.35  
67  
67  
0.45  
0.35  
67  
67  
2
1) Figures valid for an inlet water temperature of approx. 60 °C  
2) Note: program setting for testing in accordance with EN 60 456  
12  
 
Operating instructions  
Before Washing for the First Time  
0 1. Pull the detergent drawer out from the control panel a little.  
2. Pour around 1 litre of water into the washing machine via the deter-  
gent drawer. This will ensure when the washing machine is started that  
the water container is closed and that the ECO valve can function cor-  
rectly.  
3. Perform a washing cycle without any washing (MAIN WASH 95, with  
half the normal dose of detergent).  
This serves to remove residues resulting from production of the appli-  
ance from the drum and the water container.  
Prepare washing cycle  
Sort washing and prepare  
Sort washing according to care symbol and type (see "Washing types  
and care symbols").  
Empty all pockets.  
Remove metal objects (paper clips, safety pins etc.).  
In order to prevent bunching up of washing and damage to washing,  
close zippers, button up duvets and pillow cases, and tie up loose  
ends from, for example, aprons.  
Turn articles with double layered textiles inside out (sleeping bags,  
anoraks etc.).  
Coloured, knitted fabrics, as well as wool and textiles with appliqués  
should be turned inside out.  
Place small and delicate articles (baby booties, stockings, bras etc.)  
into a washing net, a pillow case with zipper, or in large socks before  
washing.  
Treat net curtains particularly carefully. Remove metal curtain rail  
rollers or burred plastic rollers, or wrap these in a net or bag.  
We cannot accept any liability for damage.  
Do not wash coloured and white washing together. White washing  
will otherwise turn grey.  
New, coloured washing often contains excessive dye. Wash these  
items separately the first time.  
13  
 
Operating instructions  
Mix small and large articles of washing! This improves washing effi-  
ciency, and the washing is more favourably distributed during the  
spin cycle.  
Fluff washing before placing into the washing machine.  
Do not place folded washing into the drum.  
Observe tips for proper care such as "wash separately" and "wash sep-  
arately several times"!.  
Washing Types and Care Symbols  
Care symbols assist in the selection of the correct washing program.  
Washing should be sorted according to type and care symbol. The tem-  
peratures indicated in the care symbols are maximum temperatures.  
Cottons ç  
Cotton and linen fabrics with this care symbol are resistant to the  
mechanical action of the washing machine and high temperatures.  
The COTTONS/LINEN program is suitable for this type of washing.  
Linen è  
ë
Cotton and linen fabrics with this care symbol are resistant to the  
mechanical action of the washing machine. The COTTONS/LINEN pro-  
gram is suitable for this type of washing.  
Easy-care washing ê  
í
î
Fabrics such as treated cottons, cotton mixtures and synthetics with  
this care symbol need careful handling. The EASY-CARES program is  
suitable for this type of washing.  
Delicates ì  
Fabrics such as those with layered fibres, micro-fibres, as well as synthet-  
ics and net curtains with this care symbol need particularly careful han-  
dling. The DELICATES program is suitable for this type of washing.  
Woollens and particularly delicate washing 9  
ì
Fabrics such as woollens, wool mixtures and silk with this care symbol  
are particularly delicate in respect of the mechanical action of the  
washing machine. The WOOLLENS program is suitable for this type of  
fabrics.  
Important! Fabrics with the ï (hand washing) or ñ (do not wash!)  
care symbols must not be washed in the washing machine!  
14  
 
Operating instructions  
Detergent and conditioner  
Which detergent and conditioner?  
Use only detergents and conditioners which are suitable for use in  
washing machines. Always observe the manufacturers instructions.  
How much detergent and conditioner?  
The required quantity depends upon:  
the amount of washing  
If the detergent manufacturer does not include dosing instructions for  
reduced loads, use one third less for half loads and only half of the full  
load detergent quantity for very small loads.  
2
extent of soiling of the washing  
hardness of tap water  
Observe instructions for use and dosing provided by the detergent and  
conditioner manufacturer.  
Using Water Softener  
In the case of medium to very hard water (from hardness band II) water  
softener should be used. Observe the manufacturers instructions! Then  
always use detergent dosing for hardness band I (= soft). Information  
on the hardness of the water in your area is provided by your local  
water board.  
Information on Water Hardness  
Water hardness in °dH  
(German hardness scale)  
Water hardness in mmol/l  
(millimol per litre)  
Hardness Band  
I soft  
0 7  
7 14  
to 1.3  
1.3 2.5  
II medium-hard  
III hard  
14 21  
2.5 3.8  
IV very hard  
greater than 21  
greater than 3.8  
15  
 
Operating instructions  
Performing a Washing Cycle  
Brief Instructions  
A washing cycle is performed in the following steps:  
0 1. Open the door, load the washing.  
2. Close the door.  
3. Add detergent/conditioner.  
4. Set the correct washing program:  
Set the program on the program selector;  
Set the temperature on the temperature selector;  
In the case of easy-care washing: Press the EASY-CARES button.  
5. Press the ON/OFF button.  
The washing machine is switched on. The washing program starts.  
6. If necessary, change the spin speed or select rinse hold.  
You can alter this setting and the temperature during the entire wash-  
ing cycle.  
At the end of the washing program:  
Important! If the washing cycle ends with a rinse hold, perform either  
PUMP OUT, SPIN or SHORT SPIN before opening the door.  
For safety reasons, the door remains locked for 1-2 minutes after the  
end of the program.  
3
7. Open thedoor, remove the washing.  
8. Press the ON/OFF button.  
The washing machine is switched off.  
16  
 
Operating instructions  
Loading the Washing  
For maximum loads see the "Program Tables". For notes on the correct  
preparation of the washing, see "Washing Types and Care Symbols".  
3
0 1. Sort the washing by type and prepare.  
2. Open the door: pull the handle on the door.  
3. Load the washing.  
Important! Do not trap any washing when closing  
the door! The fabrics and the machine could be  
damaged!  
4. Close the door firmly.  
Adding Detergent/Conditioner  
For instructions concerning detergents and conditioners see  
3
"Detergents and Conditioners".  
0 1. Pull out the drawer to the stop.  
2. Add detergent/conditioner.  
Pre wash detergent or in-wash stain  
treatment  
k
(Only for PRE WASH and STAIN pro-  
grams.)  
Powdered main wash detergent and  
l
water softener, if necessary.  
(If you use water softener,  
add the water softener on top of the  
main wash detergent.)  
Liquid conditioner  
(softener, finisher, starch)  
w
Important! Do not fill the compartment beyond the MAX mark. Thick  
liquid detergents can be diluted up to the MAX mark, powdered starch  
can be dissolved.  
3. Push the drawer fully home.  
When using liquid detergents:  
Add liquid detergent using the dosing containers provided by the  
detergent manufacturer. Observe the instructions on detergent pack.  
17  
 
Operating instructions  
Setting the Washing Program  
For suitable programs and the right temperature for the relevant type  
of washing, see "Program Tables".  
3
Important! Only turn the program  
selector clockwise!  
0 1. Set the program selector to the  
desired washing program.  
2. Set the temperature selector to  
the desired temperature.  
In the case of easy-care washing:  
3. Press the EASY-CARES button.  
The EASY-CARES button can only be combined with the programs in  
the COTTONS/LINEN, EASY-CARES (+button) program group; in all other  
cases the button has no effect.  
3
Starting the Washing Program  
0 1. Check whether the water tap is opened.  
2. Switch on the washing machine:  
Press the ON/OFF button.  
The ON/OFF indicator illuminates,  
the washing program starts.  
18  
 
Operating instructions  
Changing the Spin Speed or Selecting Rinse Hold  
0
If desired, reduce the spin speed for the final spin or  
select rinse hold:  
Press the spin speedbutton or  
Press the RINSE HOLD button.  
If RINSE HOLD is selected, the washing is left in the  
last rinse water, it is not be spun.  
If you do not reduce the spin speed, the final spin for all washing  
programs is automatically performed at 1000 revolutions per minute.  
3
The speed for the intermediate spin is dependent on the program  
selected and cannot be changed.  
During the Washing Program  
Program progress indicator  
The program selector serves as a program progress indicator by rotating  
in a clockwise direction to the end of the program. It is normal for the  
rotation speed of the program selector to vary during the program.  
Changing settings:  
During the washing program you can:  
Change the spin speed  
Select RINSE HOLD  
Change the temperature setting  
Other settings cannot be altered.  
Stopping the program early:  
0 1. Press the ON/OFF button.  
2. Turn the program selector clockwise to PUMP OUT, SPIN or SHORT SPIN.  
3. Press the ON/OFF button again.  
The water is  
pumped out or  
pumped out and the washing then spun.  
19  
 
Operating instructions  
Washing Cycle Complete/Removing the Washing  
The washing program normally ends with the final spin.  
After a rinse hold:  
After a rinse hold the water must first be pumped out or the washing  
spun:  
0 1. Release the RINSE HOLD button.  
2. Either turn the program selector clockwise to SPIN or SHORT SPIN  
(the washing is spun according to the selected program and the spin  
speed set)  
or  
turn the program selector clockwise to PUMP OUT  
(the water is pumped out).  
Once the program is finished:  
For safety reasons, the door remains locked for 1-2 minutes after the  
end of the program.  
3
0 1. Open the door.  
2. Remove the washing.  
3. Press the ON/OFF button.  
The indicator extinguishes, the washing machine is switched off.  
4. Close the water tap.  
5. Pull out the detergent drawer a little so that it can dry out. Leave the  
door slightly ajar so that air can circulate in the washing machine.  
Important! If the washing machine is not to be used for a long period:  
close the tap and isolate the washing machine from the mains.  
20  
 
Operating instructions  
Program Tables  
Washing  
Not all possible settings are given in the following, but only those that  
are useful and meaningful in everyday use.  
Max. Load  
(weight dry)1)  
Washing Type,  
Care Symbol  
Program  
Selector  
Temperature  
Selector  
Additional  
Button  
STAIN  
Cottons  
ç
5kg  
5kg  
5kg  
MAIN WASH  
QUICK WASH  
70 to 95  
Energy Saving  
Program  
Cottons ç  
STAIN2)  
E
STAIN  
Linen  
èë  
MAIN WASH  
QUICK WASH  
STAIN  
30 to 60  
Easy-Cares  
êíî  
2.5kg  
2.5kg  
(or 15-20m2  
Net Curtains)  
MAIN WASH  
QUICK WASH  
30 to 60  
EASY-CARES  
Delicates  
ì
COLD  
to 40  
DELICATES  
WOOL  
Woollens3)  
9ì  
COLD  
to 40  
2kg  
1) A 10 litre bucket contains about 2.5kg of dry washing (cotton).  
2) In order to achieve the same washing results when using the energy saving set-  
ting E (approx. 67 °C) as when using MAIN WASH 95, it is necessary to extend the  
washing time. This is achieved using the STAIN setting.  
3) Woollen garments with the woolmark may only be washed in the machine if they  
are also marked with "does not produce fluff", "non-fluffing" or "washing  
machine-safe".  
21  
 
Operating instructions  
Washing with a Pre Wash  
Max. Load  
Type of Washing  
Program  
Selector  
Temperature  
Selector  
Additional  
Button  
(weight dry)  
Cottons/Linen  
Easy-Cares  
5kg  
30 to 95  
30 to 60  
PRE WASH  
2.5kg  
EASY-CARES  
Separate Rinsing  
Max. Load  
(weight dry)  
Type of Washing  
Program Selector  
Additional Button  
Cottons/Linen  
Easy-Cares  
Delicates  
5kg  
2.5kg  
2.5kg  
2kg  
RINSE  
EASY-CARES  
GENTLE RINSE  
Woollens  
Separate Gentle Rinsing/Starching/Conditioning  
Max. Load  
(weight dry)  
Type of Washing  
Program Selector  
CONDITIONER  
GENTLE RINSE  
Additional Button  
Cottons/Linen  
Easy-Cares  
Delicates  
5kg  
2.5kg  
2.5kg  
2kg  
EASY-CARES  
Woollens  
Separate Spinning  
Max. Load  
(weight dry)  
Type of Washing  
Program Selector  
Additional Button  
Cottons/Linen  
Easy-Cares  
Delicates  
5kg  
2.5kg  
2.5kg  
2kg  
SPIN  
EASY-CARES  
SHORT SPIN  
SHORT SPIN  
Woollens  
22  
 
Operating instructions  
Cleaning and Caring  
Control panel  
Attention! Do not use furniture care products or aggressive cleansers  
for cleaning control panels and control elements.  
0
Wipe control panels with a moist cloth. Use warm water.  
Detergent drawer  
The detergent drawer should be cleaned from time to time.  
0 1. Pull the detergent drawer out as far as it will go.  
2. Remove the detergent drawer by pulling sharply.  
3. Remove siphon cap.  
4. Clean the siphon cap under running  
water.  
5. Clean compartments with warm  
water from the rear. For best results  
use a bottle brush.  
6. Push the siphon cap all the way on so  
that it is securely seated.  
7. Clean the entire compartment area of  
the washing machine with a brush.  
8. Set the detergent drawer into the guide tracks and push in.  
23  
 
Operating instructions  
Washing drum  
The washing drum is made of rust-free stainless steel. Rusty objects in  
the washing drum may lead to rust deposits on the drum.  
Attention! Do not clean the stainless steel drum with acid containing  
decalcifying agents, abrasives containing chlorine or iron, or steel wool.  
Appropriate cleansers are available from our customer service depart-  
ment.  
0
Remove rust deposits at the drum with a stainless steel cleanser.  
Fill-in door  
0
Check on a regular basis to see if deposits or foreign objects are present  
in or at the rubber sleeve behind the door, and remove.  
24  
 
Operating instructions  
What to do when…  
The somewhat different, in comparison to older wash-  
ing machines, whistling noise during spinning is due to  
the modern drive system.  
3
A rattling sound on startup in particular when using  
for the first time is caused by the circulation pump  
and is due to the design.  
Trouble Shooting  
In the case of a malfunction try to solve the problem with the aid of  
the notes given here. If you call in customer service to resolve one of  
the malfunctions listed here, or rectify an error made in the operation  
of the appliance, the customer service engineers visit is not free of  
charge, even during the period of guarantee.  
Malfunction  
Possible Cause  
Remedy  
Mains plug is not plugged in. Insert mains plug.  
Washing machine does  
not work.  
House fuse in defective.  
Replace fuse or reset.  
Close door, lock must engage  
audibly  
Door is not closed properly.  
The machine does not Tap is closed.  
take in water.  
Open tap.  
Sieve in the threaded fitting Unscrew the hose from the  
on the water inlet hose is  
blocked.  
tap, remove the sieve and  
clean under running water  
The height adjustable  
threaded feet are not cor-  
rectly adjusted.  
Adjust the feet as per the  
installation and connection  
instructions.  
There is only very little wash-  
ing in the drum (e.g. only a  
towelling dressing gown).  
Function is not impaired.  
Washing machine  
vibrates during opera-  
tion or is unstable.  
Water cannot be completely  
pumped out because  
the drain hose is kinked  
or  
the circulation pump is  
blocked.  
Check the drain hose and if  
necessary remove any kink or  
clean the circulation pump  
and remove any foreign bod-  
ies from the pump housing.  
25  
 
Operating instructions  
Malfunction  
Possible Cause  
Remedy  
Dose detergent exactly in  
accordance with the manu-  
facturers instructions.  
Excessive foaming dur- Probably too much detergent  
ing the main wash.  
was used  
Threaded fitting on the  
water inlet hose is leaking.  
Tighten the water inlet hose  
Check drain hose and if nec-  
essary replace.  
Drain hose is leaking.  
Water runs out from  
under the washing  
machine.  
Circulation pump cover is  
not closed properly.  
Close cover properly.  
Stop program, remove wash-  
ing from the door, start a  
new program.  
Washing is trapped in the  
door.  
Softener is not washed Suction cap in the compart-  
Clean detergent drawer,  
place suction cap firmly in  
position.  
in, w compartment  
for conditioner is full  
with water.  
ment for conditioner is not  
correctly positioned or is  
blocked.  
Appliance does not  
spin, water in the  
drum.  
Rinse Hold selected.  
Deselect Rinse Hold.  
Drain hose is kinked.  
Remove kink.  
Maximum pumping height  
Please contact customer  
(drain height 1m above the service who have a retrofit  
floor on which the machine kit for pumping to heights of  
Washing is not spun  
properly, water is still  
visible in the drum.  
is standing) exceeded.  
greater than 1m.  
Switch off the machine and  
Circulation pump is blocked. unplug from the mains, clean  
the circulation pump.  
In the case of siphon con-  
Clean siphon.  
nection: siphon is blocked.  
It is not possible to  
open the door.  
The door is locked for safety Wait 1-2 minutes after the  
reasons.  
end of the program.  
This is probably due to using No negative impact on the  
a detergent with a high sili- rinsing results, try using liq-  
Rinse water is cloudy.  
cate content.  
uid detergent.  
26  
 
Operating instructions  
If the washing results are not satisfactory  
If the washing is grey and there are calcium deposits in the drum  
Too little detergent was used.  
The wrong detergent was used.  
Special soiling was not pre-treated.  
Program or temperature not set correctly.  
When using component detergents, the individual components were  
not used in the correct proportions.  
If there are still gray stains on the washing  
Washing soiled with ointments, grease or oils was washed with too  
little detergent.  
Too lower temperature was used for washing.  
A common cause is that softener particularly that in concentrated  
form has got onto the washing. Wash out any such spots as quickly  
as possible and use that particular softener carefully.  
If at the end of the last rinse foam is still visible  
Modern detergents can cause foam also in the last rinse. The washing  
is however sufficiently rinsed.  
If there are white remnants on the washing  
This is an insoluble material contained in modern detergents.  
This is not the result of unsatisfactory rinsing.  
Shake or brush the washing. Perhaps you should turn the washing  
inside out before washing in future. Reconsider choice of detergent,  
possibly use liquid detergent.  
27  
 
Operating instructions  
Perform emergency drain  
If the washing machine no longer pumps out the water then an  
emergency drain must be performed.  
If the washing machine is located in a room in which below freezing  
temperatures might occur, emergency draining must be carried out if  
danger of freezing occurs.  
Furthermore, the inlet hose must be disconnected from the tap and  
laid on the floor.  
Warning! Switch the washing machine off and pull the mains plug  
prior to emergency draining.  
1
Attention! The water which runs out of the emergency draining hose  
can be hot. There is a danger of scolding! Before an emergency drain  
first allow the water to cool down!  
0 1. Have a flat container on hand to catch the water running out.  
2. Open the flap on the left of the pedestal  
cover downwards and remove.  
3. Remove the emergency drain hose from  
the bracket.  
4. Pull the emergency drain hose out a little.  
5. Place the container under the hose.  
6. Undo and remove the plug in the end of  
the emergency drain hose by turning it in  
an anti-clockwise direction.  
The wash-water runs out. Depending  
upon the amount of water, it may be  
necessary to empty the container several  
times. Temporarily close the emergency  
drain hose with the plug to this end.  
28  
 
Operating instructions  
When the water is completely drained:  
7. Press the end stop firmly back into the emergency drain hose.  
8. Push the emergency drain hose back in a little and allow it to snap into  
the mounting.  
9. Put on the flap and close.  
The ECO valve does not function when the machine has been fully  
emptied. Therefore add approx. 1liter of water before the next wash  
(pour in through the detergent drawer).  
3
Clean the circulating pump  
Warning! Switch off the washing machine and pull the mains plug  
before cleaning the circulation pump!  
1
0 1. First perform emergency draining (see above: "Perform Emergency  
Drain").  
2. Lay a cloth on the floor in front of the circulation pump cover. Some  
water may run out.  
3. Unscrew the circulation pump cover in an  
anti-clockwise direction and remove.  
4. Remove foreign body from the pump  
housing.  
5. Check whether it is possible to turn the  
pump impeller. (Jerky pump movement is  
normal.) If it is not possible to turn the  
impeller, contact customer service.  
6. Replace cover (insert stud on the cover  
into the guide slot) and tighten in a  
clockwise direction.  
7. Close emergency drain hose, push in and  
fix in place.  
8. Close the flap.  
29  
 
Installation and Connection Instructions  
INSTALLATION AND CONNECTION  
INSTRUCTIONS  
Installation Safety Precautions  
Do not tip the washing machine over the front or the left side (seen  
from the front). Electrical components could become wet!  
Check the washing machine for transport damages. You should never  
connect a damaged appliance. In the event of a damage consult your  
dealer.  
Make certain that all shipping braces have been removed and that  
the splash guard is attached to the appliance, see "Shipping Brace  
Removal". Otherwise damage may occur to the machine or close by  
furniture during the spin cycle.  
The plug may only be inserted into a properly installed earthing con-  
tact safety socket. Extension cables, octopus plugs or adapters may  
not be used.  
For permanent connection a current interruption device must be pro-  
vided for in the electrical circuit (fuse, circuit breaker, ground fault  
circuit interrupter or the like) with a contact opening of at least  
3 mm which allows for disconnection of the appliance at all poles.  
Permanent connection may only be carried out by an authorised  
electrician.  
Before starting your appliance please ensure that the nominal volt-  
age and type of current specified on the rating plate are the same as  
those used at the place of installation. Please also refer to the rating  
plate for the type of fuse to be used.  
Prior to carrying out modifications on the appliance (on the worktop  
or front door) pull out the mains plug.  
The mains feed-line may only be replaced by the customer service or  
by an authorised electrician.  
30  
 
Installation and Connection Instructions  
Dimensions of the Appliance  
Front and Side Views  
Rear View  
Inlet for Hot Water  
Inlet for Cold Water  
31  
 
Installation and Connection Instructions  
Installation of the appliance  
Washing machines with arched covers are not suited for installation  
beneath countertops.  
3
Transporting the appliance  
Do not lay the washing machine on the front or on the left side (seen  
from the front); otherwise the electrical components could become  
wet!  
Never transport the appliance without transportation protection.  
Remove the protection only at the place of installation! Transporta-  
tion without protection can lead to damages to the appliance.  
Neither lift the appliance by an open door nor by the base.  
The appliance weighs approx. 85kg.  
By transportation with a trolley: Place the trolley only sidewise.  
Remove transportation protection  
Attention! Be absolutely certain that all shipping braces have been  
removed before installing the appliance.  
Store all shipping braces in a safe place in case they are required for  
future transport (moving).  
32  
 
Installation and Connection Instructions  
Special spanner H and cover caps E (2 off) and G (1 off) are supplied  
with the appliance.  
3
0 1. Remove flexible tubing holder A.  
2. Remove the two screws B with special spanner H.  
3. Remove the four screws C.  
4. Detach transportation rail D.  
5. Close the two large openings with the cover caps E.  
Attention! Press cover caps forcefully in, so that they snap into the  
rear wall (protecting the interior of the appliance against sprayed  
water).  
6. Drive in the screws C into the four small holes again.  
7. Remove the screw and compression spring F with special spanner H,  
cover the hole with caps G.  
Attention! Press cover caps forcefully in, so that they snap into the  
rear wall (protecting the interior of the appliance against sprayed  
water).  
Prepare the installation place  
The installation surface must be clean and dry, free of floor wax and  
other smearing substances, so that the appliance does not slip off. Do  
not use any lubricant as sliding aid.  
Installation on a high-veil carpet or floor tiles with soft sponge backs  
is not recommended because the standing safety of the appliance is  
then no longer ensured.  
By installation surfaces with small-format tiles, lay a conventional  
rubber mat underneath.  
Small unevenness of the floor surface should never be levelled out by  
laying pieces of wood, carton or similar elements, but rather basically  
compensated by adjusting the screw feet.  
When it is unavoidable to install the appliance besides a gas or a  
coal-fuelled cooker, due to spatial reasons: insert a piece of heat-  
insulating board (85 x 57 cm) between the cooker and the washing  
machine; the board side facing the cooker must be provided with an  
aluminium foil.  
The washing machine may not be installed in a frost-endangered  
room. Frost-caused damages!  
Flexible feed and drain tubings may not be crinkled or squeezed.  
33  
 
Installation and Connection Instructions  
Installation on a concrete base  
When installing on a concrete base,  
for safety reasons it is imperative  
that steel plates are installed, the  
washing machine is then installed in  
these plates. The steel plates are  
available from customer service  
under ET-No. 645 425 058.  
Installation on vibrating  
floors  
In the case of floors that vibrate, especially wooden floors with floor-  
boards that flex, a water-proof wooden panel of at least 15 mm thick-  
ness must be firmly screwed to at least 2 floor beams. If possible, install  
the appliance in a corner of the room: the wooden floor is more firmly  
supported in the corners and thus has less tendency to resonant vibra-  
tion.  
Levelling on uneven floors  
Using the four adjustable threaded feet, compensation can be made for  
unevenness in the floor and the height of the appliance adjusted. The  
height can be adjusted over the range +10... -5 mm.  
To adjust the feet use the special spanner supplied for removing the  
transport braces.  
0 1. Slide the special key firmly onto the hexagon head of the threaded foot  
all the way to the stop.  
2. Adjust the threaded feet so that the appliance is level and sits stably.  
The appliance must not rock across the corners when operating under  
load.  
3. If necessary, check positioning with a spirit level.  
Important! Never compensate for small areas of unevenness in the  
floor through the use of wooden wedges, cardboard or the like. Level-  
ling should only ever be performed by adjusting the feet.  
34  
 
Installation and Connection Instructions  
Power supply  
Details on the mains voltage,  
type of current and the neces-  
sary fuse protection are to be  
found on the rating plate. The  
rating plate is above and  
behind the door.  
For permanent electrical con-  
nection within the electrical  
circuit, provisions must be made which allow for electrical disconnec-  
tion of the appliance from the mains with a contact opening of at least  
3 mm at all poles. Suitable devices include circuit breakers, fuses  
(threaded fuses must be entirely removed from the socket), ground  
fault circuit interrupters and contactors. Permanent connection may  
only be carried out by an authorised electrician.  
This appliance conforms to the following EC directives  
"Low-Voltage Directive" 73/23/EWG dated 19 February 1973  
and Directive amendment 93/68/EWG  
;
"EMC Directive" 89/336/EWG dated 3 May 1989  
and Directive amendment 93/68/EWG  
Water Connection  
Your washing machine is fitted with safety devices that prevent drink-  
3
ing water contamination and comply with the regulations of the water  
authorities in your country (e.g. in Germany: DVGW Directives). It is  
therefore not necessary to take further protective measures in the  
installation.  
Permissible water pressure  
Water pressure must be equal to a least 1 bar (= 10N/cm2 = 0.1 MPa),  
and no more than 10 bar (= 100N/cm2 = 1 MPa).  
By more than 10 bar: connect a pressure reduction valve upstream.  
By less than 1 bar: Unscrew the flexible inlet tubing on the magnetic  
inlet valve on one side of the appliance and remove the flow meter  
(thereby remove the sieve by means of a pair of pointed pliers and  
then remove the rubber washer behind it). Remount the sieve.  
35  
 
Installation and Connection Instructions  
Water feed  
A flexible pressure tubing of 1.3m length is supplied.  
If a longer feed tubing is needed, a complete VDE-approved tubing set  
with mounted screw connections, supplied by our customer service,  
should be used exclusively.  
For washing machines without Aqua-Control, tubing sets are  
available in lengths of 2.2m, 3.5m and 5m.  
For washing machines with Aqua-Control, tubing sets are available  
in lengths of 2.0m, 2.9m and 3.9m.  
Attention! Under no circumstances may tubing be pieced together for  
the purpose of lengthening!  
Sealing rings are either inserted in plastic nuts of the tubing screw con-  
3
nection or contained in an accompanying packet. Do not use other  
seals.  
0 1. Connect the angled hose connector to the  
machine.  
Attention! Plastic nut at the tube coupling  
may only be hand tightened.  
2. Connect the straight hose connector to a water tap  
with an R 3/4 (inch) thread.  
Attention! Only tighten the plastic nuts on the  
hose connectors by hand.  
3. By opening the water tap slowly prior to the initial  
operation, check whether the connection is tight.  
36  
 
Installation and Connection Instructions  
Hot and Cold Water Connection  
Appliances designed for connecting to hot and cold water supplies can  
be connected up to the hot and cold water taps as per the diagram  
below. The hose set supplied is approved for use with hot and cold  
water.  
Important! The hot water temperature must not exceed 70 °C.  
hot  
hot  
cold  
If an appliance designed for connecting to hot and cold water supplies  
is to be connected to a cold water tap only, an adapter is available from  
customer service under ET No. 645.430 709.  
37  
 
Installation and Connection Instructions  
Water drain-off  
The drain-off tubing can be connected either to a siphon or be hanged  
in a washing or sink basin or in a bathtub.  
For extension (max. 3 m floor length and up to 80 cm high) only origi-  
nal tubing may be used. The customer service supplies drain-off tubing  
of 2.7 and 4m lengths.  
Water drain-off inside a siphon  
The spout at the end of the tubing fits all common siphon types.  
0
Make the connection spout/siphon secure with a tubing clip.  
Water drain-off inside a basin  
For hanging in a wash basin, sink or bath,  
the drain hose must be prevented from  
moving using the detachable elbow sup-  
plied.  
The tube could otherwise be pushed out of  
the basin by the reactive force imparted by  
draining water.  
Small sink basins are not suitable!  
Fasten the elbow on the water tap or on  
the wall by means of the hole.  
0
Delivery heights above 1m  
Every washing machine is provided with a suds pump for draining the  
washing/rinsing suds, which can deliver liquids via the drain-off tubing  
up to a height of 1m, measured from the standing level of the machine.  
For delivery heights above 1m please establish contact with the AEG  
customer service.  
38  
 
Guarantee Conditions/ Service Departments  
Technical data  
Height x Width x Depth  
Depth with open door  
Height adjustment  
Weight when empty  
Load (depending on the program)  
Area of use  
Wash cycle drum speed  
Spin cycle drum speed  
Water pressure  
85x60x60cm  
95cm  
approx. +10/-5mm  
approx. 85kg  
max. 5kg  
Household  
max. 53min-1 r.p.m.  
see type plate  
1-10bar  
(=10100N/cm2 = 0.1 1.0MPa)  
GUARANTEE CONDITIONS/  
SERVICE DEPARTMENTS  
Weitere Kundendienststellen im Ausland  
In diesen Ländern gelten die Garantiebedingungen der örtlichen Part-  
ner. Diese können dort eingesehen werden.  
Further after-sales service agencies overseas  
In these countries our AEG agentsown guarantee conditions are appli-  
cable. Please obtain further details direct.  
Autres agences étrangères assurant le service après-vente  
Dans ces pays, les conditions de garantie des concessionnaires de la  
région sont valables. Vous pouvez les consulter sur place.  
Otros puntos de Postventa en el extranjero  
En estos países rigen las condiciones de nuestros representantes locales.  
las cuales pueden ser consultadas allí mismo.  
Ulteriori uffici del servizio tecnico assistenza clienti allestero  
In questi paesi sono valide le condizioni di garanzia dei partner locali.  
Queste condizioni possono essere esaminante sul luogo.  
Serviços de assistência técnica no estrangeiro  
Nestes países são válidas as condições de garantia dos concessionários  
locais, podendo aí ser consultadas.  
39  
 
Guarantee Conditions/ Service Departments  
U.A.E. Abu Dhabi  
Universal Trading Company Jordan Household  
Jordan  
Malta  
ITC  
P.O. Box 43 99  
Tel.: 335331  
Supply Co. Ltd.  
P.O. Box 3/68  
International Trading Com-  
pany  
Amman/Tel.: 69 70 50  
White House Building  
Mountbatte Street  
Blata L-Bajda/Tel.: 220644  
Egypt  
Kanada  
EURO-LINE Appliances  
Mauritius  
Happy World Centre Ltd.  
Middle East Commercial  
Center  
2150 Winston PARK Drive 20 P.O. 7 54  
P.O. Box 19  
Kairo-Heliopolis  
Tel.: 29917/31634  
Oakville, Ontario L6H 5V1  
Tel.: 905 829 3980  
Fax: 905 829 3985  
1 Chausee Street  
Port Louis  
Tel.: 25355  
Australia  
Korea (South)  
Core Incorp.  
3/F Chewoo Bldg.  
200 Nonhyun-Dong  
Kangnam-Ku  
Namibia  
ANDI-Co Pty. Ltd  
9 Kingston Town Close  
Oakleigh VIC 3166  
Tel.: (03) 9569 1235  
Fax: (03) 9569 1450  
AEG NAMIBIA (PTY) LIM-  
ITED-Jeppe Street  
Northern Industrial Area  
Windhoek  
Tel.: (061) 21-6082/4  
Fax: (061) 217838  
Seoul  
Telefon 82 2 549 89 61  
Bahrain/Arabian Gulf  
A.A. Zayani & Sons  
P.O. Box 9 32  
Croatia  
Electrolux D.O.O.  
Suplova 7  
New Zealand  
Euro-Life New Zealand Ltd.  
Privat Bag  
Bahrain  
Tel.: 261060  
10000 Zagreb  
Tel.: 1 61 19512  
Fax: 1 61 19513  
58 Symonds Street  
Auckland  
Tel.: (09) 525 2222  
Bulgaria  
Kuwait/Arabian Gulf  
Nouvelle Caledonie  
Socometra N.C.  
B.P. 483  
Nouman  
Tel.: 275444  
Electrolux Bulgaria E.O.O.D. Ali Al-Ghanim Est.  
91 Levski Blvd.  
1000 Sofia  
Tel.: 2 806676  
Fax. 2 980 5276  
P.O. Box 10 83  
Tel.: 5322463  
Fax: 5242114  
Cyprus  
Lebanon  
Oman  
Servilan Co. Ltd.  
P.O. Box 36 05  
77, Kennedy Ave.  
Nicosia  
Adib & Assaferi  
P.O. Box 539  
Tripoli  
Moshin Haider Darwish  
P.O. Box 1 35  
Muscat  
Tel.: 703743  
Tel.: 311 477  
40  
 
Guarantee Conditions/ Service Departments  
Estonia  
Latavia  
Poland  
Electrolux Estonia Ltd.  
Mustamäe tee 24  
EE0006 Tallinn  
Electrolux Latavia Ltd.  
Terlaton Street 42/44  
1011 Riga  
Electrolux Poland Sp. zo.o.  
ul. Domaniewska 41  
02-034 Warszawa  
Tel.: (372) 6 650 090  
Fax: (372) 6 650 092  
Tel.: 371 2 297821  
Fax: 371 2 821286  
tel.: 022 874 33 33  
fax: 022 874 33 00  
Hongkong  
Lthuania  
Electrolux Lthuania  
Verkui 29  
2600 Vilnus  
Tel.: 372 272 3326  
Fax: 372 272 3366  
Russia  
Wo Kee Services Ltd.  
585-609 Castle Peak Road  
Kwai Chung N.T.  
Hongkong  
Electrolux Russia Ltd.  
16 Olympiysky prospekt  
129090 Moscow  
Tel.: (095) 937 7837  
Fax: (095) 926 5513  
Tel.: 2494 4000  
Israel  
Evis Ltd.  
P.O. Box 70 39  
Tel-Aviv 67013  
Tel.: 3257311  
Malaysia  
Saudi Arabia  
Alia Trading Corporation  
P.O. Box 4101  
King Abdul Aziz Street  
Riyadh  
Arzbergh Engineering  
No. 49A/B, Jalan Petaling  
Utama 7  
4600 Petaling Jaya  
Tel.: 3 795 1084  
Fax: 3 795 1082  
Tel.: 4645977  
Al Nahas Est.  
Musaidia Market I  
P.O. Box 1 15 29  
Jeddah  
Tel.: 6606852  
Japan  
Electrolux Japan Ltd.  
Singapore  
Arzbergh Engineering  
Slovenia  
Electrolux Slovenia D.O.O.  
Yasuda Warehouse 4F 3-3-12 19 Tanglin Road 06-07  
Traska Ul. 132  
Heiwajima Ota-Ku  
Tokyo  
Tel.: 81 3 3544 3363  
Fax: 81 3 3763 6143  
Singapore 247909  
Tel.: 65 7356572  
Fax: 7351124  
1000 Ljubljana  
Tel.: 61 1234 137  
Fax: 61 1234 238  
Thailand  
Slovakia Rep.  
Electrolux Slovakia S.R.O.  
Seberiniho 1  
821 03 Bratislava  
Tel.: 7 4333 9745  
Fax: 7 4333 6976  
South Africa  
AEG (Pty) Ltd.  
55, 12th Road  
P.O. Box 1 02 64  
Kew/Johannesburg 2000  
Tel.: 8069111  
OLYMPIA Thai Ltd.  
44 Ratchadapisek Road  
10320 Bangkok  
Tel.: 2 513 6111  
Fax: 2 513 2574  
Hungary  
Electrolux Lehel KFT  
(AEG Div)  
ErzsebetKiralyne Utja 87  
1142 Budapest  
USA  
Syria  
ANDI Co. Appl. Inc. East  
65 Campus Plaza  
Edison, New Jersey 0837  
USA/Tel.: (201) 2258839  
Masri & Shami  
P.O. Box 24 96  
Damascus  
Tel.: 214080  
Tel.: 00361/251 84 44  
41  
 
Index  
INDEX  
C
P
Calcium . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Conditioner . . . . . . . . . . . . 9, 11, 15, 17, 22  
liquid . . . . . . . . . . . . . . . . . . . . . . . . . .9, 17  
Cotton Mixtures . . . . . . . . . . . . . . . . . . . . . 14  
Cottons . . . . . . . . . . . . . . . . . . 10, 14, 21, 22  
Customer service . . . . . . . . . . . . . . 24, 25, 43  
Pre Wash . . . . . . . . . . . . . . . . . . . . . . . . 11, 17  
Pre Wash Detergent . . . . . . . . . . . . . . . . . . .17  
Program Progress . . . . . . . . . . . . . . . . . . . . .19  
Pump Out . . . . . . . . . . . . . . . . . . . . . . . 11, 20  
Q
Quick Wash . . . . . . . . . . . . . . . . . . . . . . 10, 21  
D
R
Danger of freezing . . . . . . . . . . . . . . . . .6, 28  
Delicates . . . . . . . . . . . . . . . . . 11, 14, 21, 22  
Detergent . . . . . . . . . . . . . . . . . . . . . 9, 15, 17  
Rating Plate . . . . . . . . . . . . . . . . . . .9, 35, 43  
Rinse Hold . . . . . . . . . . . . . . . . 10, 11, 19, 20  
S
E
Short Spin . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Silk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Softener . . . . . . . . . . . . . . . . . . . . . . .8, 9, 17  
Spin . . . . . . . . . . . . . . . . . . . . . 10, 11, 19, 22  
Stain . . . . . . . . . . . . . . . . . 8, 10, 17, 21, 27  
Starching . . . . . . . . . . . . . . . . . . . . . . . . 11, 22  
Stopping the Program . . . . . . . . . . . . . . . . .19  
Easy-Cares . . . . . . . . . . . .10, 14, 18, 21, 22  
ECO Valve . . . . . . . . . . . . . . . . . . . . . . . .13, 29  
Energy Saving . . . . . . . . . . . . . . . . . . . .12, 21  
G
Gentle Rinse . . . . . . . . . . . . . . . . . . . . . .11, 22  
Guarantee . . . . . . . . . . . . . . . . . . . . . . . .6, 25  
H
W
Washing  
Hot/Cold Water Connection . . . . . 12, 31, 37  
coloured . . . . . . . . . . . . . . . . . . . . . . . . . .13  
delicate . . . . . . . . . . . . . . . . . . . . . . . 13, 14  
easy-care . . . . . . . . . . . . . . . . . . . . . . . . . .14  
lightly soiled . . . . . . . . . . . . . . . . . . . . . . . .8  
normally soiled . . . . . . . . . . . . . . . . . . . . . .8  
starching . . . . . . . . . . . . . . . . . . . . . . . 9, 17  
Water  
circulation pump . . . . . . . . . . . . . . . . 9, 29  
emergency drain . . . . . . . . . . . . . . . . . . .28  
hardness . . . . . . . . . . . . . . . . . . . . . . . 8, 15  
pump out . . . . . . . . . . . . . . . . . . . . . 11, 20  
softener . . . . . . . . . . . . . . . . . . . . .8, 15, 17  
Woollens . . . . . . . . . . . . . . . . . 11, 14, 21, 22  
I
In-Wash Stain Treatment . . . . . . . . . . . .9, 17  
L
Linen . . . . . . . . . . . . . . . . . . . . 10, 14, 21, 22  
Liquid detergent . . . . . . . . . . . . . . . . . . . . . 17  
M
Main Wash . . . . . . . . . . . . . . . . . . . . . . .10, 21  
Main Wash Detergent . . . . . . . . . . . . . . . . . 17  
N
Net Curtains . . . . . . . . . . . . . . . . . . 13, 14, 21  
O
Open Door . . . . . . . . . . . . . . . 16, 17, 20, 26  
42  
 
Service  
SERVICE  
If a malfunction should occur at the appliance, refer first to the section  
"What to do when ..." in these user instructions. If you do not find any  
applicable instructions there, contact your customer service centre.  
(Addresses and telephone number can be found in the "Service Depart-  
ments" section.)  
Be well prepared before you phone. This facilitates the diagnosis and  
the decision as to whether a customer service visit is necessary. With  
our checklist you can gather important information before making  
your call:  
Make a note of the PNC number and  
the S-number.  
Both of these number can be found  
on the rating plate on the inside of  
the door of your washing machine.  
......................................................  
......................................................  
PNC  
S-No.  
In addition to this please establish if possible:  
How is the malfunction noticeable ?  
Under what circumstances does the malfunction occur?  
You will be charged even during the warranty period  
if you could have corrected the malfunction yourself with the help of  
the malfunctions table (see "What to do when ..." section),  
if the customer service technician is required to make several trips  
because he had not received all relevant information before his visit,  
and must return, for example, to pick up replacement parts. This  
additional driving can be avoided if your telephone call is well prepa-  
red, as described above.  
43  
 
AEG Hausgeräte GmbH  
Postfach 1036  
D-90327 Nürnberg  
© Copyright by AEG  
822 942 079 - 01 - 0600  
 

Acer Computer Monitor AL1702 User Manual
Acer Projector PD116 User Manual
ADC IP Phone VoIP Telephone User Manual
Addonics Technologies Computer Drive RCHDSAES User Manual
Advantech Computer Hardware RMD 1150 User Manual
AEG Ventilation Hood 125 D User Manual
Aiphone Telephone Accessories NEW 5 User Manual
Ativa Computer Monitor AT22OH User Manual
ATN Binoculars ATN 7X50c User Manual
Beko Microwave Oven D 6633 User Manual