Airlux Group Toaster 13467 1200 0512 User Manual

DRYER  
Owner's Guide  
Table of Contents  
ImportantSafetyInstructions..........................................................2  
DryingProcedures............................................................................3  
Features.............................................................................................3  
CommonDryingProblems..............................................................4  
CareandCleaning...........................................................................4  
AvoidServiceChecklist...................................................................5  
Warranty...........................................................................................6  
BackCover.......................................................................................8  
Read and Save These Instructions  
Product Registration  
Thank you for choosing this  
dryer. This owner's guide will  
explain proper operation and care.  
Record Your Model and Serial Numbers  
Record below the model and serial numbers found on the dryer serial plate  
located on the left side of the door opening. Keep these numbers for future  
reference.  
Model Number:  
Serial Number:  
Purchase Date:  
Register Your Product  
Theself-addressedPRODUCT  
REGISTRATIONCARDshouldbe  
filled in completely, signed and  
returned.  
P/N 134671200 (0512)  
 
Follow the guidelines below for preparing the load for drying.  
Read the Operating Instructions card for operating your specific model.  
• Always read and follow fabric care labels and laundry product labels.  
Drying Procedures  
To reduce the risk of fire, electrical shock, or injury to persons, read  
Important Safety Instructions, pages 2-3, before operating this dryer.  
1. Prepare items for drying.  
Dry items of similar fabric, weight and construction in the same load.  
Separate dark items from light-colored items. Separate items that shed lint from  
those that attract lint. If an item sheds lint, turn it inside out.  
Besurebuckles, buttonsandtrimareheatproofandwon'tdamagethedrumfinish.  
Close zippers, fasten hooks and Velcro®-like fasteners. Tie strings and sashes to  
prevent snagging and tangling.  
Follow fabric care label instructions.  
If possible, turn pockets inside out for even drying.  
Check for stains which may not have been removed in washing. Dryer heat may  
permanently set some stains. Repeat stain removal process before drying.  
Place small items in a mesh bag to prevent tangling and for easy removal.  
2. Check that lint screen is clean and in place.  
3. Load the dryer.  
The average load will fill the drum 1/3 to 1/2 full. Items need room to tumble freely  
for even drying and less wrinkling. Do not overload dryer.  
When drying large items, dry only 2 or 3 at a time. Fill out the load with small and  
medium sized items.  
For delicate or very small loads, add 2 lint-free towels for better drying, less  
wrinkling, and to prevent grease stains caused by fabric softener sheets.  
Do not overdry items. Overdrying can cause wrinkling, shrinkage, harshness, and  
a build-up of static electricity, which can produce more lint.  
If desired, add a dryer fabric softener sheet.  
Place small items in a mesh bag.  
4. Close the dryer door and set dryer controls (some models).  
See Operating Instructions card for your specific model controls.  
5. Turn cycle selector clockwise to the desired setting.  
6. Start the dryer.  
Push Start Button for 2 seconds or turn the START knob clockwise to ON, hold for  
1-2 seconds and release.  
To add or remove items when the dryer is running, open the door. The dryer will  
always stop when the door is opened. Allow the drum to come to a complete stop  
before reaching inside.  
To restart dryer, close the door then push the Start Button for 2 seconds or turn  
the START knob clockwise to ON, hold for 1-2 seconds and release.  
The dryer will not start if the cycle selector is in the OFF position.  
7. When the cycle ends, remove items immediately and hang or fold. If load is  
Fill dryer drum 1/3 to 1/2 full.  
removed before the cycle ends, turn cycle selector to OFF.  
Features  
Cycle Signal Control (some models)  
When the Cycle Signal Control is ON, a signal will sound at the end of each cycle and during  
the Press Saver setting (some models). The volume is adjustable on some models.  
Drum Light (some models)  
A drum light will come on whenever the door is opened to illuminate the dryer drum during  
loading and unloading. Closing the door turns off the light.  
Reversible Dryer Door  
Your dryer is equipped with a reversible door. The door can be hinged on the right or left  
side. Refer to the INSTALLATION INSTRUCTIONS for directions on changing the door.  
Drying Rack (some models)  
Use the drying rack to dry items which should not be tumble dried.  
1. Open the dryer door and remove the lint screen.  
2. Insert drying rack into the dryer drum. Place the front bar under the lip of the lint screen  
opening.  
3. Place items to be dried on top of the rack. Weight should not exceed 10 lbs. Leave space  
between items, but do not let items hang over the sides or through the grids. Do not  
tumble other items when using the drying rack.  
4. Select a timed dry setting best suited for items being dried. Use only the Air Fluff (no  
heat) temperature setting for items containing plastic, foam rubber, rubber-like  
materials, feathers or down.  
5. When items are dry, remove the rack and replace the lint screen. If lint screen is not in  
place, tumbling items could enter the exhaust system and cause damage to the dryer.  
Place the front bar under  
the lip of the lint screen opening.  
3
 
To reduce risk of fire or serious injury to persons or property, comply with the  
basic warnings listed in Important Safety Instructions, pages 2-3, and those listed below.  
Care and Cleaning  
Beforecleaningthedryerinterior, unplugtheelectricalpowercordtoavoidelectrical  
shock hazards.  
Do not use any type spray cleanser when cleaning dryer interior. Hazardous fumes or  
electrical shock could occur.  
Inside  
Clean the lint screen after every load. Lint build-up in the screen restricts air flow, which  
causes longer drying times. The screen is located at the bottom of the door opening.  
Remove by pulling straight up. Remove the lint and replace the screen.  
Occasionally a waxy build-up may form on the lint screen from using dryer-added fabric  
softener sheets. To remove this build-up, wash the lint screen in warm, soapy water. Dry  
thoroughly and replace. Do not operate the dryer without the lint screen in place.  
Clean lint screen after every load.  
Ifthedryerdrumbecomesstainedfromnoncolorfastfabrics,cleanthedrumwithadamp  
cloth and a mild liquid household cleanser. Remove cleanser residue before drying the  
next load.  
Every 18 months an authorized servicer should clean the dryer cabinet interior and  
exhaust duct. These areas can collect lint and dust over time. An excessive amount of  
lint build-up could result in inefficient drying and possible fire hazard.  
Outside  
Clean the cabinet with mild soap and water. Never use harsh, gritty or abrasive  
cleansers.  
If the cabinet becomes stained, clean with diluted chlorine bleach [1/2 cup  
(120 ml) in 1 quart (.95 liter) water]. Rinse several times with clear water.  
Remove glue residue from tape or labels with a mixture of warm water and mild  
detergent. Or, touch residue with the sticky side of the tape or label.  
Do not store or place laundry products  
on top of dryer at any time. They can  
damage the finish or controls.  
Beforemovingthedryer, placeastripofcardboardorthinfiberboardunderthe front  
leveling legs to prevent damage to floor.  
Common Drying Problems  
Many drying problems involve poor cleaning results, poor soil and stain removal, residues of lint and scum, and fabric damage. For satisfactory drying results,  
follow these suggestions provided by The Soap and Detergent Association.  
PROBLEM  
POSSIBLECAUSES  
SOLUTIONS  
PREVENTIVEMEASURES  
Greasy, oily  
stains  
• Add a few bath towels to small loads for  
proper tumbling.  
• Fabric softener sheet.  
• Rub fabric softener stains with bar soap.  
Rinse and rewash.  
• Some "silk-like" fabrics should be air dried.  
• Use proper drying temperature.  
• Place fabric softener sheet on top of load  
before starting the dryer.  
Lint  
• Do not overload dryer.  
• Use fabric softener in washer or dryer to  
reduce static electricity.  
• Remove items when they are slightly damp to  
avoid overdrying.  
• Overloading.  
• Overdrying causes static  
electricity.  
• Lint screen not clean when  
cycle began.  
• Reduce load size and rewash using liquid  
fabric softener in the final rinse.  
• Or, add a fabric softener sheet and tumble  
without heat.  
• Use lint brush or roller to remove lint.  
• Check that lint screen is clean and in place.  
• Lint is attached to "pills."  
Pilling  
• Use fabric softener to lubricate fibers.  
• When ironing, use spray starch or fabric finish  
on collars and cuffs.  
• Pilling is normal with  
• Use a lint brush or shaver to remove pills.  
• Irreversible condition.  
(Fibers break off,  
ball up and cling  
to fabric.)  
synthetic and permanent  
press fabrics. This is due to  
abrasion from normal wear.  
• Turn items inside out to reduce abrasion.  
Shrinking  
• Follow fabric care label directions.  
• If shrinking is a concern, check load often.  
• Remove items while slightly damp and hang or  
lay flat to complete drying.  
• Overdrying.  
• Block knits into shape.  
Wrinkling  
• Do not overload dryer.  
• Remove items as soon as cycle ends.  
• Overloading.  
• Leaving items in dryer after  
cycle ends.  
• Reduce load size and tumble at medium or  
low heat for 5-10 minutes.  
• Remove items immediately. Hang or fold.  
4
 
Before calling for service, review this list. It may save both time and expense. The list includes  
common occurrences that are not the result of defective workmanship or materials in this dryer.  
Avoid Service  
Checklist  
OCCURRENCE  
POSSIBLE CAUSE  
SOLUTION  
Electrical power cord is not securely plugged  
in or plug may be loose.  
Make sure the plug fits tightly in wall outlet.  
Dryer does not start.  
House fuse blown or circuit breaker tripped.  
Reset circuit breaker or replace fuse.  
Make sure electrical line is not overloaded and the dryer is on  
a separate circuit.  
Thermal limiter tripped.  
Call authorized service person for replacement.  
Replace fuse.  
There are 2 house fuses in the dryer circuit. If  
1 of the 2 fuses is blown, the drum may turn  
but the heater will not operate.  
Dryer runs but won't heat.  
Gas supply valve is not open (gas models).  
Check to make sure supply valve is open. See INSTALLATION  
INSTRUCTIONS for procedure.  
Dryer does not have anough air supply to  
support the burner flame (gas models).  
See INSTALLATION INSTRUCTIONS.  
LP gas supply tank is empty or there has been  
a utility interruption of natural gas (gas  
models).  
Refill or replace tank.  
Dryer should heat when utility service is restored.  
Lint screen is clogged with lint.  
Makesurealllinthasbeenremovedfromthedryerlintscreen  
before starting each cycle.  
Drying cycle takes too long,  
outsideofthedryerfeelstoo  
hot or smells hot.  
Exhaust duct requirements have not been  
met.  
Exhaust duct must be at least 4 inches in diameter and made  
of rigid or flexible metal.  
When in place, the duct must have no more than two 90°  
bends and must not exceed length listed in INSTALLATION  
INSTRUCTIONS.  
Electricdryerisconnectedtoa208voltcircuit.  
Drying procedures have not been followed.  
Drying time will be 20% longer than drying on a 240 volt  
circuit.  
See Drying Procedures, page 4.  
Outside exhaust hood or exhaust duct may  
be clogged or restricted.  
Clean out any obstruction.  
High humidity.  
Use a dehumidifier near the dryer.  
Dryer is overloaded.  
Do not overload. See Drying Procedures, page 4.  
Remove items as soon as cycle ends.  
See Drying Procedures, page 4.  
Excessive wrinkling.  
Items left in dryer too long.  
Insufficient sorting of items.  
Drying temperature too high.  
Follow fabric care label instructions.  
Foreign objects such as coins, pins, clips or  
buttons are inside the dryer.  
Always remove foreign objects from pockets before  
laundering. Remove objects from drum and restart dryer.  
Scratchingorchippingofthe  
drumfinish.  
Permanently attached items such as belt  
buckles, zippers and fasteners may be hitting  
the inside of the drum.  
It may be necessary to baste a scrap of material securely  
around ornaments before drying to prevent scratching and  
damage to the dryer.  
Drumdamagecausedbyforeignobjectsorpermanently  
attached items is not covered by the warranty.  
5
 
Major Appliance Warranty Information  
Your appliance is covered by a one year limited warranty. For one year from your original date of  
purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to  
be defective in materials or workmanship when such appliance is installed, used and maintained in  
accordance with the provided instructions.  
Exclusions  
This warranty does not cover the following:  
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.  
2. Product that has been transferred from its original owner to another party or removed outside the USA or  
Canada.  
3. Rust on the interior or exterior of the unit.  
4. Products purchased "as-is" are not covered by this warranty.  
5. Food loss due to any refrigerator or freezer failures.  
6. Products used in a commercial setting.  
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances  
not in ordinary household use or used other than in accordance with the provided instructions.  
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.  
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,  
etc.,which are not a part of the appliance when it is shipped from the factory.  
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or  
knobs, handles, or other cosmetic parts.  
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip  
charges, or mileage expense for service calls to remote areas, including the state of Alaska.  
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,  
cabinets, walls, etc.  
13. Damages caused by: services performed by unauthorized service companies; use of parts other than  
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or  
external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT  
REPAIR OR REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES,  
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR.  
ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS  
PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN  
LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE  
DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO  
YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER  
RIGHTS THAT VARY FROM STATE TO STATE.  
If You Need  
Service  
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period  
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.  
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone  
numbers below.  
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances  
North America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada  
Corp. Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and  
parts under this warranty must be performed by Electrolux or an authorized service company. Product features or  
specifications as described or illustrated are subject to change without notice.  
USA  
Canada  
1.800.944.9044  
Electrolux Major Appliances  
North America  
1.800.668.4606  
Electrolux Canada Corp.  
5855 Terry Fox Way  
P.O. Box 212378  
Augusta, GA 30907  
Mississauga, Ontario, Canada  
L5V 3E4  
 
3 Ways To Contact Us!  
¡3 formas de contactar nos!  
3 façons de nous contacter!  
USA, EE.UU., É.-U.,  
1-800-944-9044  
CANADA, CANADÁ  
1-800-265-8352  
(English)(Français)  
Or, O, Ou  
CANADA, CANADÁ  
USA, EE.UU., É.-U.  
Electrolux Major Appliances North America,  
a division of Electrolux Home Products, Inc.  
5855 Terry Fox Way  
Mississauga, Ontario, Canada  
L5R 4C2  
Electrolux Major Appliances North America,  
a division of Electrolux Home Products, Inc.  
P.O. Box 212378  
Augusta, GA 30917  
Or, O, Ou  
Visit Frigidaire’s Web Site at:  
Visite la página de Frigidaire en Internet:  
Visitez le site Internet de Frigidaire au:  
© 2005 Electrolux Major Appliances North America,  
a division of Electrolux Home Products, Inc.  
The Electrolux Group. The world’s No. 1 choice.  
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use combined. More than 55 million  
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year  
to a value of approximately USD 14 billion in more than 150 countries around the world.  
PRINTED IN USA  
 

Abocom Network Router WAP404 User Manual
Addonics Technologies Network Card ST5DVRE User Manual
AEG Dishwasher 2807 User Manual
Agilent Technologies Work Light E1401 90493 User Manual
Airlink Network Card AWLL6080 User Manual
Algolith Stereo Receiver FRS 1002 MD
Allied Telesis Network Card AT AR040 10 User Manual
Alpine CD Player CDA 9887 User Manual
Bakers Pride Oven Fryer LGF User Manual
Bakers Pride Oven Microwave Oven VGH Series User Manual