Aiwa CD Player CA DW539 User Manual

OPERATING INSTRUCTIONS  
INSTRUCCIONES DE MANEJO  
MODE D’EMPLOI  
CA-DW539  
SISTEMA DE COMPONENTES DE DISCOS  
COMPACTOS PORTATIL  
CD CARRY COMPONENT SYSTEM  
MINICHAINE PORTABLE A LECTEUR DE CD  
English : See page 2.  
En  
E
Español : Ver la página 12.  
Français : Voir page 22.  
F
8B-CT5-913-01  
020320ACK-I-FM  
U
 
INSTRUCTIONS  
Object and Liquid Entry – Never push objects of any  
kind into this unit through the cabinet slots as they may  
touch dangerous voltage points or short-circuit parts  
that could result in a fire or electric shock. Never spill  
liquid of any kind on the unit.  
Damage Requiring Service  
Unplug this unit from the wall outlet and refer servicing  
to qualified service personnel under the following  
conditions:  
1) When the power cord or plug is damaged.  
2) If liquid has been spilled, or objects have fallen into  
the unit.  
Electric Power  
Power Sources – This unit should be operated only  
from the type of power source indicated on the marking  
label. If you are not sure of the type of power supply to  
your home, consult your appliance dealer or local power  
company. To operate unit on battery power, or other  
sources, refer to the operating instructions.  
Grounding or Polarization – This unit is provided  
with a polarized alternating-current line plug (a plug  
having one blade wider than the other). This plug will fit  
into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the  
outlet, try reversing the plug. If the plug should still fail  
to fit, contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the polarized  
plug.  
Power-Cord Protection – Power-supply cords should  
be routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience  
receptacles, and the point where they exit from the  
product.  
Overloading – Do not overload wall outlets, extension  
cords, integral convenience receptacles as this can  
result in a risk of fire or electric shock.  
3) If the unit has been exposed to rain or water.  
4) If the unit does not operate normally by following the  
operating instructions. Adjust only those controls  
that are covered by the operating instructions as  
improper adjustment of other controls may result in  
damage and will often require extensive work by a  
qualified technician to restore the unit to normal  
operation.  
5) If the unit has been dropped or the cabinet has been  
damaged.  
6) When the unit exhibits a distinct change in  
performance - this indicates a need for service.  
Do not attempt to service this unit yourself as opening  
or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified  
service personnel.  
Replacement Parts – When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or  
having the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric  
shock or other hazards.  
En  
Safety Check – Upon the completion of any service or  
repairs to this unit, ask the service technician to perform  
safety checks to determine that the unit is in proper  
operating condition.  
Lightning  
For added protection for this unit receiver during a  
lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet. This will prevent damage to the unit due to  
lightning and powerline surges.  
Maintenance  
Cleaning – Unplug this unit from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
Condensation – Moisture may form on the CD pickup  
lens when:  
- The unit is moved from a cold spot to a warm spot  
- The heating system has just been turned on  
- The unit is used in a very humid room  
- The unit is cooled by an air conditioner  
When this unit has condensation inside, it may not  
function normally. Should this occur, leave the unit for a  
few hours, then try to operate again.  
ENGLISH 3  
 
Power supply  
Connections  
IMPORTANT  
Make sure that the AC cord is disconnected and  
batteries are removed before connecting speakers.  
Do not connect other than the supplied speakers.  
OPE/BATT  
Position the speakers.  
1
To couple with the speakers, slide each speaker  
down into the guide brackets on the center unit until  
the height is level with the unit.  
The OPE/BATT indicator lights up while the power is  
on.  
To separate the unit from the speakers, slide the  
speakers up and off, while pressing the speaker  
release knob.  
Using on AC house current  
Connect the AC cord as illustrated below.  
to the AC inlet of the unit  
to an AC outlet  
(AC 120 V, 60 Hz)  
supplied AC cord  
CAUTION  
Release knob  
Use only the supplied AC cord. Use with other cords  
may result in the risk of fire.  
Connect the speakers.  
Connect the right speaker cord to the R terminals,  
2
and the left speaker to the L terminals.  
Connect the speaker cord with the white broken line  
to 0 and the other cord to 9 .  
Using on batteries  
Open the lid of the battery compartment on the rear and  
insert eight R20 (size D) batteries, not supplied, as  
illustrated below. Then close the lid.  
To switch from AC power supply to battery supply,  
disconnect the AC cord from the AC inlet.  
R20 (D)  
When the OPE/BATT indicator becomes dim, the tape  
speed slows down, volume decreases, or sound is  
distorted during operation, replace the batteries.  
Notes on batteries  
To avoid damage from leakage or explosion, observe  
the following:  
Insert the batteries with the 0 and 9 marks correctly  
aligned.  
Do not mix different types of batteries or old batteries  
with new ones.  
When the unit is not to be used for a long period,  
remove the batteries.  
Never recharge the batteries, apply heat to them or  
take them apart.  
Remove dead batteries.  
If liquid leaks from the batteries, wipe thoroughly to  
remove.  
4
ENGLISH  
 
Remote control  
Insert two R6 (size AA) batteries.  
Specifications  
Tuner section  
Frequency range, antenna FM: 87.5 - 108.0 MHz  
Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz  
step) Ferrite bar antenna  
Deck section  
Track format 4 tracks, 2 channels / Frequency range  
Normal tape: 50 - 12,000 Hz (EIAJ) / Recording  
system AC bias / Erasing system Magnet erase /  
Heads Deck 1: Recording/playback head (1),  
Erasure head (1); Deck 2: Playback head (1)  
R6 (AA)  
When the reach of the remote control signal is less than  
5 meters (16 feet), replace the batteries.  
CD player section  
Disc Compact disc / Scanning method Non-  
contact optical scanner (semiconductor laser) / Rotation  
speed Approx. 500 - 200 rpm/CLV / Error correction  
Cross interleave, Reed, Solomon code / Number of  
channels 2 channels / D/A conversion 1 bit DAC  
The remote control may not operate correctly  
when:  
- The unit is exposed to intense light, such as direct  
sunlight  
General  
- Objects block the remote control signal to the unit  
Power requirements DC 12 V using eight size D  
(R20) batteries, AC 120 V, 60 Hz / Dimensions (W × H  
To use the buttons on the remote control  
Buttons on the remote control and the main unit with  
identical indications have the same functions.  
7
3
3
× D) 274 × 245 × 211 mm (10 / × 9 / × 8 / in.) /  
8
4
8
Weight 3.1 kg (6 lbs. 13 oz.) (excluding batteries) /  
Power output 5 W + 5 W (EIAJ, 2.7 ohms DC) /  
Power consumption 20 W / Accessories AC cord  
(1), Remote control (1)  
To turn the power on  
Press POWER to turn on the display.  
When using the unit on the batteries, this button will not  
turn the power on.  
Speaker  
Type 120 mm cone type / Dimensions (W × H × D)  
3
3
3
160 × 236 × 170 mm (6 / × 9 / × 6 / in.) / Weight  
8
8
4
En  
Approx. 0.9 kg (2 lbs.) × 2 / Impedance 2.7 ohms /  
Allowable max. input 7 W  
To turn the power off  
Press POWER to turn off the display.  
When one of the deck operation buttons is pressed, this  
button will not turn the power off.  
Specifications and external appearance are subject to  
change without notice.  
To use the FUNCTION button  
Each time FUNCTION is pressed while the power is on,  
COPYRIGHT  
Please check the copyright laws relating to  
recordings from disc, radio or external tape for the  
country in which the machine is being used.  
the function is selected cyclically.  
CD  
RADIO  
*TAPE  
* applicable when one of the deck operation buttons is  
pressed  
FUNCTION  
POWER  
If an erroneous display or malfunction occurs  
Make sure that none of the deck operation buttons is  
pressed.  
Press s while pressing TAPE/POWER/6 STANDBY.  
If the unit cannot be reset in the way above, disconnect  
the AC cord and remove all the batteries to turn off the  
display.  
Leave the unit for a while and turn the power back on.  
ENGLISH 5  
 
TUNER OPERATION  
A
Press *RADIO/BAND repeatedly to select  
the desired band.  
*REPEAT/SLEEP/FM MODE/OSC  
- If an FM stereo broadcast contains noise, press the  
1
button so that  
is displayed.  
FM  
AM  
Noise is reduced, although reception is monaural.  
To restore stereo reception, press the button again.  
- If a high-pitched sound is heard during AM recording,  
press the button repeatedly until the noise is reduced.  
Its position can be checked by “•” being on or off the  
display.  
The power is turned on and the previously tuned  
station is received.  
* or BAND on the remote control (applicable  
when the AC cord is connected)  
Press r  
, t  
(TUNING DOWN, UP) to  
2
* or MODE on the remote control  
select a station.  
During FM stereo reception,  
is displayed.  
To change the AM tuning interval  
The default setting of the AM tuning interval is 10 kHz/  
step. If you use the unit in an area where the frequency  
allocation system is 9 kHz/step, change the interval as  
follows.  
After listening, press TAPE/POWER/6 STANDBY to  
turn the power off.  
For better reception  
1
2
Press RADIO/BAND to display FM.  
Press s while pressing RADIO/BAND to display the  
AM frequency.  
FM  
AM  
When the AM tuning interval is changed, the preset  
stations are cleared.  
NOTE  
If the unit picks up noise from other electrical  
appliances nearby, like a TV or fluorescent lights, move  
the unit.  
Extend the rod antenna  
and orient it for the best  
reception.  
The antenna is inside the  
unit. Position the unit for  
the best reception.  
For quick tuning (Auto Search)  
Keep r , t pressed until the tuner starts  
searching for a station. When a station is tuned to, the  
search stops.  
If the broadcast signal is weak, it does not stop. To  
stop the search manually, press r  
or t  
.
To listen with the headphones  
Connect headphones with a stereo mini plug to the  
PHONES jack.  
6
ENGLISH  
 
SOUND ADJUSTMENT  
Volume or tone adjustment does not affect  
recording.  
VOLUME (VOL)  
Press VOLUME N or M . The volume level is  
displayed as a number from 0 to MAX (25).  
The volume level is automatically set to 14 if the  
power is turned off when the volume level is set  
to 15 or more. (except when turning the power  
back on within 4 seconds)  
Pressing DISPLAY on the remote control  
displays the adjusted volume level.  
3-mode equalizer  
Press one of the 3-mode equalizer buttons (ROCK,  
POP, JAZZ). The selected mode R (Rock), P (Pop)  
or J (Jazz) appears in the display.  
PRESETTING STATIONS  
To cancel, press the selected mode button.  
ROCK - Emphasizes the high and low range of  
music.  
POP - Emphasizes voice and midrange of music.  
JAZZ - Emphasizes the low range of music.  
When using the remote control, press EQ  
repeatedly until the desired mode is selected.  
The equalizer mode changes to ROCK, POP, JAZZ  
or no equalization, cyclically.  
You can preset up to 15 stations in each band.  
Select a station.  
1
Press *s MEMORY once so that “M” is  
displayed to store the station.  
2
A station is assigned a preset number, beginning  
from 1 in consecutive order for each band.  
Preset number  
En  
T-BASS system  
The T-BASS system enhances the realism of low-  
frequency sound.  
Press T-BASS to turn it on or off.  
Frequency  
* or s STOP on the remote control  
Repeat steps 1 and 2.  
3
The next station will not be stored if a total of 15  
preset stations have already been stored for a  
band.  
To listen to preset stations  
Select a band then press e  
PRESET repeatedly.  
c
PLAY on the remote control is also available.  
To select a preset number directly with the  
remote control  
Press the numbered buttons 0-9 and +10.  
Example:  
To select number 15, press +10 and 5.  
To select number 10, press +10 and 0.  
To clear a preset station  
Select the preset number first. Within 4 seconds, keep  
s
pressed until Mand the preset number disappear  
in the display.  
The higher numbers in the band are decreased by one.  
ENGLISH 7  
 
CD OPERATION  
B
To start play when the power is off, press CD. The  
power is turned on and play of the loaded disc begins  
(Direct Play Function).  
Press CD.  
The power is turned on.  
1
Press CD OPEN to open the disc  
compartment. Place a disc with the  
printed side up and close the disc  
compartment.  
2
If you load a disc while the CD indicator flashes in step  
2, play starts without pressing e  
.
To select a track directly with the remote control,  
press the numbered buttons 0-9 and +10. CD play  
starts from the selected track and continues to the last  
track.  
CD OPEN  
Example:  
To select number 25, press +10, +10 and 5.  
To select number 10, press +10 and 0.  
Total number of tracks and total playing time are  
displayed. It will take about 15 seconds when  
loading a CD-RW disc.  
After listening, press TAPE/POWER/6 STANDBY to  
turn the power off.  
NOTE  
Press *e  
PRESET to start play.  
3
Do not use irregular shape CDs (example: heart-  
shaped, octagonal ones).  
It may result in malfunctions.  
Do not place more than one disc in the disc  
compartment.  
The number of the track being played and elapsed  
playing time are displayed.  
* or c PLAY on the remote control  
s
*e  
MEMORY Stops play.  
Do not try to open the disc compartment during play.  
Do not touch the lens. Doing so may cause  
malfunctions.  
The unit may not play a CD-R/RW disc that is  
recorded on personal computers or some kinds of  
CD-R/RW recorders because of differences in  
recording platforms.  
Do not attach any seal or label to either side (the  
recordable side or the labeled side) of a CD-R/RW  
disc. It may cause malfunction.  
Do not load an unrecorded CD-R/RW disc. It will take  
over 30 seconds to read the disc. The disc may be  
damaged if you try to open the disc compartment  
while reading the disc.  
PRESET Pauses play. To resume play, press  
again.  
* or a PAUSE on the remote control  
r
, t  
Searches for a particular point during  
playback. Keep r  
or t  
pressed and then release  
it.  
Skips to the beginning of a track. Press r  
repeatedly.  
*REPEAT/SLEEP/FM MODE/OSC Repeats a  
single track or all tracks. Select as follows.  
1 : A single track is played repeatedly. Select a  
track with r or t  
: All tracks are played repeatedly.  
or t  
[
.
[
* or REPEAT on the remote control  
8
ENGLISH  
 
SETTING THE SLEEP TIMER  
The unit can be turned off automatically at a  
specified time.  
Keep REPEAT/SLEEP/FM MODE/OSC  
pressed until “30” flashes in the  
display.  
1
Within 4 seconds, press r  
specify the time until the power is  
turned off.  
or t  
to  
2
Each time it is pressed, the time changes  
between 10 and 90 minutes in 10-minute steps.  
PROGRAMMED PLAY  
Up to 30 tracks can be programmed from the disc.  
Specified time  
In stop mode, keep *s MEMORY pressed  
until “M” flashes in the display.  
1
* or s STOP on the remote control  
While the sleep  
timer works, the  
dot keeps flashing.  
Press r  
or t  
to select a track, then  
2
press s MEMORY to store it.  
Track number  
En  
To check the time remaining until the power  
is turned off  
Repeat step 1 shown above. The remaining time is  
displayed for 4 seconds.  
Programmed number  
To cancel the sleep timer  
Display the remaining time and press r  
repeatedly until OFF is displayed.  
To select a track with the remote control  
Press the numbered buttons 0-9 and +10.  
or t  
Repeat step 2 to program other tracks.  
3
4
NOTE  
Keep s MEMORY pressed until M” stops  
flashing to finish the program.  
Mremains displayed and indicates the unit stores  
If the unit is turned off during tape playback, c on  
the deck will not be released. Press Z  
release c  
to  
.
the programmed tracks.  
Press e  
to start play.  
5
To check the program, press r  
or t  
in stop  
mode.  
To clear the program, press s once in stop mode so  
that Mdisappears in the display.  
To change the programmed tracks, clear the  
program and repeat all the steps again.  
ENGLISH 9  
 
TAPE OPERATION  
C
Use Type I (normal) tapes only.  
Note that recording is done on only one side of the  
tape.  
RECORDING FROM A CD OR THE  
TUNER  
Insert a tape to be recorded on into deck 1  
with the side to be recorded facing out.  
1
INSERTING A TAPE  
Press Z  
to open the cassette holder and  
insert a tape with the exposed side down and  
the side to be played facing out.  
Deck 1  
Deck 1  
Deck 2  
Get ready to record from the source.  
To record from a CD, press CD and load the disc.  
To record from a radio broadcast, press RADIO/  
BAND and tune to a station.  
2
3
Push the cassette holder to close.  
Press w on deck 1 to start recording.  
c
is pressed simultaneously.  
PLAYING A TAPE  
When the selected function is CD, CD play and  
recording starts simultaneously.  
Press c while the power is off.  
The power is turned on and play of the inserted tape  
To record only the selected tracks of a CD  
begins.  
1
Follow steps 1 to 4 of PROGRAMMED PLAY on  
page 9 to program tracks.  
Press w .  
The volume level is displayed during tape operation.  
2
Z
Stops play. The power will be automatically  
turned off.  
To stop recording, press Z  
play, press s STOP/MEMORY.  
on deck 1. To stop CD  
a
f
Pauses play. To resume play, press again.  
/g Rewinds/ fast forwards. To stop the  
To pause recording, press a . To resume recording,  
press again.  
winding, press Z  
.
To erase recording, press w on deck 1 while the  
power is off.  
Continuous play  
After play on deck 2 finishes, play on deck 1 will start  
After recording, press TAPE/POWER/6 STANDBY to  
turn the power off.  
without interruption.  
During play on deck 2, press a then press c on  
deck 1.  
a
on deck 1 will be released at the end of play on  
deck 2.  
10 ENGLISH  
 
MICROPHONE MIXING  
Connect a microphone with a mini plug to  
the MIC jack and play a source to be mixed.  
To record the microphone mixing sound, insert a  
tape in deck 1 and press w .  
During dubbing at high speed, the microphone  
mixing sound is not recorded.  
MIC VOL Adjusts the microphone volume. If a  
howling sound is produced, turn the volume down.  
To prevent howling, hold the microphone away  
from the speakers. The use of unidirectional type  
microphones is also recommended.  
Maintenance  
DUBBING A TAPE  
To clean the cabinet  
Press TAPE/POWER/6 STANDBY to turn  
the power off.  
1
Use a soft cloth lightly moistened with mild  
detergent solution. Do not use strong solvents  
such as alcohol, benzine or thinner.  
Insert a tape to be recorded on into deck 1  
with the side to be recorded facing out.  
2
3
4
To clean the heads  
When the tape heads are dirty;  
- high frequency sound is not emitted  
- the sound is not adequately high  
- the sound is off-balance  
Insert a tape to be played into deck 2 with  
the side to be played facing out.  
Press a then press w on deck 1 to enter  
recording pause mode.  
En  
- the tape cannot be erased  
The power is turned on.  
- the tape cannot be recorded on  
After every 10 hours of use, clean the tape heads  
with a head cleaning cassette.  
Use separately sold dry-type or wet-type cleaning  
cassette.  
c
is pressed simultaneously.  
Press DUBB SPEED HIGH/LOW to select a  
dubbing speed.  
The HIGH-SPEED DUBBING indicator lights up:  
Dubs at high speed.  
The HIGH-SPEED DUBBING indicator goes off:  
Dubs at normal speed.  
5
Refer to the instructions of the cleaning cassette  
for details.  
Lens  
To clean the lens  
Use a cotton swab  
slightly moistened with  
cleaning fluid. Wipe  
gently from the center  
to the edge.  
Press c on deck 2.  
6
a
on deck 1 is released and recording starts.  
To stop recording, press Z  
The power will be automatically turned off.  
on deck 1 and deck 2.  
NOTE  
When recording near a television, noise may be  
recorded. Move the unit away from the television.  
To prevent accidental erasure  
Break off the plastic tabs on the cassette tape with a  
screwdriver or other pointed tool after recording.  
To record on the tape again  
Cover the tab openings with adhesive tape, etc.  
Side A  
Tab for side A  
ENGLISH 11  
 
NOTE  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation.  
This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is  
no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
... Reorient or relocate the receiving antenna.  
... Increase the separation between the equipment and  
receiver.  
... Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
... Consult the dealer or an experienced radio/TV  
technician for help.  
CAUTION  
Modifications or adjustments to this product, which are  
not expressly approved by the manufacturer, may void  
the users right or authority to operate this product.  
Printed in China  
 

3Com Switch DUA1647 7AAA01 User Manual
3Com Telephone V7000 User Manual
3Com Telephone VCX V7000 User Manual
Air King Vacuum Cleaner CVS 22E User Manual
Alpine Automobile Alarm SEC 8028 User Manual
AMCC All in One Printer M1120N User Manual
Axis Communications Security Camera P3364 V User Manual
BC Speakers Portable Speaker DE 82 User Manual
Behringer Headphones UL2000M User Manual
Behringer Microphone MIC200 User Manual