Allied Telesis Switch AT 8000S 48 User Manual

Datasheet | Switches  
AT-8000S/48  
Layer 2 Stackable Fast Ethernet Switch  
AT-8000S/48  
Secure Management  
Key Features  
48 port stackable 10/100TX Layer 2 switch  
with 2 active SFP bays (unpopulated) and  
2 standby 10/100/1000T ports (RJ-45)  
Only authorized administrators can access the  
management interface of the 8000S series.  
Protocols such as SSL, SSH and SNMPv3  
facilitate this protection of your network with  
local or remote connections.  
Easy,Well Known Management  
Industry standard CLI  
Simple intuitive, full featured AlliedTelesis  
Web Interface  
Overview  
One of a series of stackable switches from  
AlliedTelesis, the AT-8000S/48 provides high  
performance Layer 2 switching in an affordable  
fixed configuration platform.This switch offers  
48 10/100 ports, two fixed 1Gbps SFP slots  
plus two integrated stacking connectors that  
deliver a total of 4Gbps stacking bandwidth.The  
stacking capability integrated into this platform  
is configured as a resilient ring topology  
designed to provide high reliability and  
simplified management for higher port density  
applications.  
Secure encrypted Web and CLI management  
with SSHv2 and SSL  
SNMP  
Securing the Network Edge  
To ensure the protection of your data, it is  
important to control access to your network.  
Protocols such as IEEE 802.1x port-based  
authentication guarantee that only known users  
are connected to the network. Unknown users  
who physically connect can be isolated to a  
pre-determined part of your network offering  
guests such benefits as Internet access while  
ensuring the integrity of your private network  
data.  
Two level access privileges  
Affordable Truly Stackable 10/100  
Switching Platform  
Single IP address stack management  
4Gig resilient ring stacking architecture  
Across stack link aggregation  
Across stackVLAN configuration  
Across stack port mirroring  
Redundant standby stack master  
Gigabit and Fast Ethernet SFP  
Support  
Ideal Branch Office and Wiring  
Closet Connectivity  
All the QoS Needed in the Wiring Closet  
for Today’sVoice and Data Networking  
Eight priorities assigned to four queues  
IEEE 802.1p for Layer 2 QoS  
DSCP (DiffServ) for Layer 3 QoS  
IEEE 802.1p to DSCP remarking traffic ready for  
transport to the Layer 3 core of the network  
Layer 2 and Layer 3 ACL  
All switches in the 8000S family support both  
Gigabit and Fast Ethernet Small Form-factor  
Pluggables (SFPs).This makes the 8000S series  
an ideal family for environments where Gigabit  
fiber switches will be phased in over time.The  
8000S family allows for connectivity to the  
legacy 100FX hardware until it is upgraded to  
Gigabit. Support for both speeds of SFPs allows  
organizations to stay within budget as they  
migrate to faster technologies.  
Powerful line rate performance and stackability  
make this switch ideal for branch offices or the  
wiring closet of larger offices. The state-of-the-  
art QoS capability of this product ensures  
reliable delivery of advanced network services  
such as voice while effectively controlling the  
continually increasing traffic needs found in  
today’s networks.  
Easy Access Networking  
Securing the Network at its Most  
Vulnerable Point  
IEEE 802.1x and RADIUS network login: for  
advanced control of user authentication and  
accountability  
GuestVLAN: to ensure visitors or unauthorized  
users connect only to services defined by IT e.g.  
Internet  
Featuring an industry standard CLI and Allied  
Telesis’ intuitive yet fully featured Web interface  
the advanced features of the AT-8000S/48 are  
accessible to a wide range of system  
administrators. The well known CLI and Web  
interfaces significantly reduce learning time and  
minimize the cost of deployment.  
TACACS+: for ease of management security  
administration  
Layer 2 and Layer 3 ACL  
Port MAC address security options  
%
+
Power Supply Efficiency  
Allied Telesis  
 
Layer 2 Stackable Fast Ethernet Switch  
AT-8000S/48 |  
Security  
Environmental Specifications  
Operating temp 0°C to 40°C (32°F to 104°F)  
Storage temp -25°C to 70°C (-13°F to 158°F)  
Relative humidity 10% to 90% non-condensing  
Storage humidity 5% to 95% non-condensing  
Operating altitude Maximum 3,000m (9,843ft)  
Ordering Information  
Management security: username and password protection  
SSHv2 for Telnet management  
SSLv3 for Web management  
RFC 1492  
AT-8000S/48-xx  
48 port stackable 10/100TX Layer 2 switch with  
2 active SFP bays (unpopulated) and 2 standby  
10/100/1000T ports (RJ-45)  
TACACS+  
RFC 2138  
RADIUS Authentication  
Port-based network access control  
Dynamic VLAN1  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
IEEE 802.1x  
Where xx = 10 for US power cord  
20 for no power cord  
RADIUS accounting1  
Multi-session mode1  
Action on violation1  
Single-host violation1  
Guest VLAN timeout1  
Authentication not-required1  
Electrical/ Mechanical Approvals  
30 for UK power cord  
40 for Australian power cord  
50 for European power cord  
Safety  
EMI  
UL 1950 (UL/cUL), EN60950 (TUV)  
FCC Class A, EN55022 Class A,  
VCCI Class A, C-Tick, EN61000-3-2,  
EN61000-3-3  
Immunity  
EN55024  
Accessories  
Small Form Pluggables (SFPs)  
Security login banner1  
Guest VLANs  
RoHS compliant  
RFC 2865  
IEEE 802.1x port-based network  
access control  
AT-SPFX/2  
Multi-mode fiber, 2km, 100FX, SFP, 1310nm  
Package Description  
One AT-8000S/48 switch  
Power cord AC  
MAC-based network access control  
ACL - Access Control Lists  
AT-SPFX/15  
Single-mode fiber, 15km, 100FX, SFP, 1310nm  
Rack-mount kit  
Fault Protection  
Broadcast storm control  
Rubber feet for desktop installation  
RS232 management cable  
Stacking cable  
AT-SPFX/40  
Single-mode fiber, 40km, 100FX, SFP, 1310nm  
Power Characteristics  
Install guide and user guide in CD and at  
AT-SPTX  
Copper, GbE Small Form-factor Pluggable (SFP)  
Voltage input  
100- 240V AC  
Voltage output  
Current  
12vDC  
AT-SPSX  
1.5A  
Country of Origin  
China  
Multi-mode fiber, GbE Small Form-factor Pluggable (SFP)  
850nm  
Power consumption  
Power supply efficiency  
Heat dissipation  
Clock Frequency  
Acoustic noise  
32.6W2  
79.88%  
184.41 BTU/hour  
166MHz  
41dB  
AT-SPLX10  
Single-mode fiber, 10km, GbE SFP, 1310nm  
AT-SPLX40  
Single-mode fiber, 40km, GbE SFP, 1310nm  
AT-SPLX40/1550  
Single-mode fiber, 40km, GbE SFP, 1550nm  
AT-SPZX80  
Single-mode fiber, 80km, GbE SFP, 1550nm  
AT-SPBD10-13  
Single-mode fiber, 10km, GbE SFP, 1310/1490nm,  
LC-BiDi  
AT-SPBD10-14  
Single-mode fiber, 10km, GbE SFP, 1490/1310nm,  
LC-BiDi  
1
New feature on AT-S94 version 3.0.0.32  
2 Worst case load condition for actual measured power on sample unit  
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895  
European Headquarters |Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11  
Asia-Pacific Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830  
© 2011 AlliedTelesis Inc.All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners.  
617-000176 Rev. P  
 

3M Projector MP8625 User Manual
Acu Rite Marine Radio 01502BPDI User Manual
Addonics Technologies Computer Hardware RR2035RSDMS User Manual
Addonics Technologies Network Card CRTM4HES User Manual
Advantech Computer Monitor FPM 3150 Series User Manual
Allied Telesis Network Router AT TN7100 User Manual
American DJ Musical Instrument Mini Gressor II User Manual
American Standard Thermostat 2050111 User Manual
Avital Automobile Alarm 740T User Manual
Axis Communications Security Camera M1103 User Manual