Altec Lansing Portable Speaker iMT702 User Manual

Altec Lansing inMotion Max Portable Speaker  
®
for iPhone and iPod  
iMT702  
User Guide  
 
Safety Information  
The lightning flash with arrowhead, within an equilateral triangle,  
is intended to alert the user to the presence of un-insulated  
“dangerous voltage” within the products enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to persons.  
Caution: To prevent the risk of electric shock, do not remove cover  
(or back). No user-serviceable parts inside. Refer servicing to  
qualified service personnel.  
The exclamation point within an equilateral triangle is intended  
to alert the user to the presence of important operating and  
maintenance (servicing) instructions in the literature accompanying  
the appliance.  
RechARGeAbLe bATTeRy  
10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for the replacement of the obsolete outlet.  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent  
type. Do not expose to excessive heat such as sunshine, fire, or the like.  
The battery used in this product must be properly recycled or disposed of. Instructions for removing the  
battery can be found in the Getting Started section. Please contact your local recycling center for proper  
battery handling and disposal instructions.  
11. Protect the power cord from being walked on or pinched – particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
12. Do not install in an area that impedes the access to the power plug. Disconnecting the power plug is  
the only way to completely remove power to the product and must be readily accessible at all times.  
Rated voltage: 3.7V Capacity: 1800mAh Type: LC18650  
cAUTION  
13. Power source – Use only power supplies of the type specified in the operating instructions or  
as marked on the appliance. If a separate power supply is included with this apparatus, do not  
substitute with any other power supply – use only manufacturer-provided power supplies.  
To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle or other outlet  
unless the blades can be fully inserted to prevent blade exposure.  
WARNING  
14. Unplug this apparatus during lightning storms or when unused for long periods of time.  
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.  
15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped. For service, refer to qualified service personnel, return to the  
dealer, or call the Altec Lansing service line for assistance.  
IMPORTANT SAFeTy INSTRUcTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
16. For products that incorporate batteries, please refer to local regulations for proper battery disposal.  
17. Only use attachments/accessories specified by the manufacturer.  
4. Follow all instructions.  
18.  
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or  
sold with the apparatus. When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
5. Do not use this apparatus near water – This apparatus shall not be exposed to dripping or splashing,  
and no objects filled with liquids, such as vases, shall be placed on the apparatus.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. The  
apparatus should not be situated on a bed, sofa, rug or similar surface that may block the ventilation  
openings. The apparatus must not be placed in a built-in installation, such as a closed bookcase or  
cabinet that may impede the flow of air through the ventilation openings. Ventilation should not be  
impeded by covering the openings with items such as newspapers, tablecloths, curtains, etc.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. No naked flame sources, such as lighted candles, should be placed on the apparatus.  
1
 
Contents  
Welcome................................................................................................................................................................................................. ii  
Safety Information..................................................................................................................................................................................1  
Package Contents..................................................................................................................................................................................3  
Getting Started.......................................................................................................................................................................................4  
Placing and Removing Adapters for the iPhone and iPod.....................................................................................................................5  
Speaker Features and Indicators ...........................................................................................................................................................6  
Speaker Controls....................................................................................................................................................................................7  
Enhanced Remote Features...................................................................................................................................................................9  
Listening to Your iPhone or iPod..........................................................................................................................................................11  
Charging your iPhone or iPod ..............................................................................................................................................................12  
Listening to the FM Radio ....................................................................................................................................................................12  
Listening to a Non-docking iPod or Other Portable Audio Device.......................................................................................................13  
Maintaining Your Speaker System .......................................................................................................................................................13  
Troubleshooting....................................................................................................................................................................................14  
Warranty ...............................................................................................................................................................................................17  
2
 
Package Contents  
Altec Lansing inMotion Max speaker system  
User Guide and  
Quick Connect Instructions  
Enhanced remote  
Miscellaneous adapters  
for iPhone and iPod  
AC adapter  
FM radio antenna  
3
 
Getting Started  
how to Install the Ac Adapter  
how to Disconnect the Rechargeable battery  
If you need to replace the lithium-ion battery, you will need to first remove it.  
1
Connect the AC adapter cable plug  
into the speaker system’s jack.  
1
2
Unplug the speaker system from the wall outlet.  
The jack is located on the back of the  
system.  
Remove the rechargeable battery compartment cover.  
The battery compartment is located on the back of the speaker  
system. Remove the 2 screws securing the cover in place. Then  
remove the cover.  
2
Plug the AC adapter into the wall  
outlet.  
3
Unplug the battery and remove it.  
how to charge the Lithium-Ion battery  
Your Altec Lansing inMotion Max speaker  
system includes a rechargeable lithium-ion  
battery. This battery should be fully charged  
before initial use of the speaker system. A full charge will provide up to 3.5  
hours of continuous playing time.  
NOTe The lithium-ion battery must be properly recycled or disposed of.  
Please contact your local recycling center for proper battery handling and  
disposal instructions.  
how to Install the enhanced Remote battery  
When the battery icon on the LCD screen displays a single segment, you  
should recharge the battery. When the battery icon starts flashing, the  
speaker system is about to automatically shut down.  
The enhanced remote battery (included) is not installed at the factory. To  
install the battery, follow the steps below:  
1
Pull out the battery holder.  
1
Connect the speaker system to a wall outlet.  
The battery door is located on the  
lower end of the remote. Simply pull  
the tab to open the battery holder.  
See the How to Install the AC Adapter section. The battery icon on  
the LCD screen will show the battery is charging.  
2
Allow the battery to charge.  
2
3
Position the battery (included) so it  
sits in the battery holder correctly.  
Charging time: Up to 3 hours for a full charge. When the battery is  
fully recharged, the battery icon is shown as full.  
Make sure the polarity (the + and – sides of the battery) is correct.  
WARNING During the recharging process, it is typical for the battery  
to become warm. To be safe, keep flammable materials away from the  
speaker system.  
Replace the battery door.  
NOTe Please discard used batteries properly.  
4
 
Placing and Removing Adapters for the iPhone and iPod  
Your Altec Lansing inMotion Max speaker system includes removable  
adapters for todays popular iPhone and iPod models. These adapters  
ensure that your iPhone and iPod properly fit in the speaker systems dock.  
As new iPhone and iPod models are introduced, new adapters will be made  
available to customers. You may also use the adapters supplied with your  
how to Place an Adapter  
1
Select the correct adapter for your  
iPhone or iPod.  
Using the correct adapter ensures a  
proper fit for your iPhone or iPod.  
2
Gently press the iPhone or iPod  
adapter into the dock.  
Now you can carefully place your  
iPhone or iPod into the dock.  
NOTe Your iPhone or iPod cannot be in a  
case or a “skin.”  
how to Remove an Adapter  
1
2
Remove your iPhone or iPod.  
Grip the adapter and pull gently upward.  
5
 
Speaker Features and Indicators  
Expanded Sound Stage technology button  
Track forward button  
Track back button  
Volume increase button  
Volume decrease button  
Source button  
Power  
on/off  
button  
FM antenna connector  
AUX jack  
LCD  
display  
AC adapter jack  
Universal docking station for iPhone or iPod  
6
 
Speaker Controls  
Ensure the AC adapter is connected to the system and plugged into the wall. See the Getting Started  
section for more information. Press the button.  
Turn on your speaker system  
Turn off your speaker system  
Press the button. Whenever you are finished using your speaker system, please remember to turn it  
and your iPhone, iPod or other MP3 player off to conserve electricity.  
Change audio source  
Turn up the volume  
Turn down the volume  
Press the  
button to cycle through and select the audio source: iPod, FM radio or AUX.  
Press the + button.  
Press the – button.  
Skip to the beginning of the current song on  
your iPhone or iPod  
In “iPod” mode, press the button.  
In “iPod” mode, press and hold the button.  
In “iPod” mode, press the button.  
Rewind the currently playing track on your  
iPhone or iPod  
Skip to the beginning of the next song on  
your iPhone or iPod  
Fast-forward the currently playing track on  
your iPod  
In “iPod” mode, press and hold the button.  
Tune radio stations  
In “FM” mode, use the and buttons. See the Listening to the Radio section for additional information.  
In “FM” mode, press and hold the or button. See the Listening to the Radio section for additional  
information.  
Scan radio stations  
7
 
Speaker Controls  
See the Listening to a Non-docking iPod or Other Portable Audio Device section for specific information  
on using devices attached to your speaker systems AUX jack.  
Listen to a non-docking iPod or MP3 player  
Activate Expanded Sound Stage (ESS)  
Proprietary ESS technology widens the stereo image to fill a room with sound. Press the ESS button to  
technology  
activate it.  
Press the and  
displayed on the screen, press the button to reset all settings.  
buttons simultaneously for a few seconds. Once the word “RESET ?” is  
Reset all settings  
Reset all settings (see above), and use the + and – buttons to select the region closest to you  
(“REGION 1: USA,” “REGION 2: EUROPE,” “REGION 3: JAPAN WIDE,” or “REGION 4: JAPAN.”)  
Then, press the button to save your selection.  
Select FM Band region  
8
 
Enhanced Remote Features  
The enhanced remote lets you operate many functions of your Altec Lansing  
inMotion Max speaker system:  
Turn on your speaker system  
Turn off your speaker system  
Press the button.  
Press the button.  
Press the  
Power on/off button  
Source button  
Volume increase  
button  
Volume decrease  
button  
button to cycle through  
Change audio source  
and select the audio source: iPod, FM radio  
or AUX.  
Track back button  
Track forward button  
Expanded Sound  
Stage technology  
button  
Play/pause button  
Turn up the volume  
Press the + button.  
Press the – button.  
Turn down the volume  
FM preset buttons  
FM preset buttons  
In “iPod” mode, press the  
playing a selected track. Press the button  
again to pause it.  
button to begin  
Play/Pause a song on your  
iPhone or iPod  
Skip to the beginning of the current  
song on your iPhone or iPod  
In “iPod” mode, press the button.  
Rewind the currently playing  
track on your iPhone or iPod  
In “iPod” mode, press and hold the button.  
In “iPod” mode, press the button.  
Skip to the beginning of the next  
song on your iPhone or iPod  
Fast-forward the currently playing  
track on your iPhone or iPod  
In “iPod” mode, press and hold the button.  
9
 
Enhanced Remote Features  
Tune radio stations  
In “FM” mode, use the or buttons. See the Listening to the Radio section for additional  
information.  
In “FM” mode, press and hold the or button. See the Listening to the Radio section for  
additional information.  
Seek radio stations  
In “FM” mode, tune to the station you’d like to store, and then press and hold one of  
the PRESET buttons (P1, P2, P3 or P4). See the Listening to the Radio section for more  
information.  
Store a radio station  
In “FM” mode, press the PRESET button (P1, P2, P3 or P4) that corresponds to the station  
you’d like to hear. See the Listening to the Radio section for more information.  
Select a preset radio station  
Proprietary ESS technology widens the stereo image to fill a room with sound. Press the ESS  
button to activate it.  
Activate Expanded Sound Stage (ESS) technology  
NOTe For best results, aim the enhanced remote control toward the inMotion Max speaker system.  
10  
 
Listening to Your iPhone or iPod  
how to Access Additional Features on your iPhone or iPod Using  
the enhanced Remote  
1
2
Dock your iPhone or iPod in the Altec Lansing inMotion Max  
speaker system.  
Select “iPod” mode.  
Press the P1 button once on the  
Press the  
button on your speaker system or enhanced  
enhanced remote to advance to the next  
shuffle mode. SH ALBU is displayed when  
the system is in album shuffle mode. SH  
remote until the iPod icon appears on the LCD.  
3
4
5
Press the button on your iPhone or iPod.  
SONG is displayed when the system is in  
song shuffle mode. SH OFF is displayed  
Music from your iPhone or iPod will start playing. The speaker  
system and its remote are capable of controlling basic functions of  
3rd-generation iPod models, the iPod touch and iPhone.  
Shuffle function  
when the shuffling function has been  
turned off. Note: Use the P2 button on  
some older iPod models. Functionality  
may vary per iPhone or iPod model.  
Adjust the volume.  
Use the + and – buttons on the Altec Lansing speaker system  
to adjust the system volume. Or, use the + and – buttons on the  
enhanced remote.  
Press the P2 button once on the  
enhanced remote to advance to the next  
repeat mode. RPT ONE is displayed when  
the system is in the repeat one mode.  
Find your desired song.  
Press the or button on your speaker system or enhanced remote  
to go to the next or previous track. Press and hold the or button  
on your speaker system or enhanced remote while track is playing for  
high-speed forward or reverse music search of the current track.  
RPT ALL is displayed when the system is  
the repeat all mode. RPT OFF is displayed  
Repeat function  
when the repeat function has been turned  
off. Note: Use the P2 button on some  
older iPod models. Functionality may vary  
per iPhone or iPod model.  
NOTe To conserve battery power, reduce the speaker system volume level.  
NOTe During battery-only operation, the speaker system automatically shuts  
down if no audio is detected for a few minutes. Press the button to turn the  
speaker system back on. (If the speaker system is connected to a wall outlet,  
it will remain on until the button is pressed and the indicator light shuts off.)  
Press the P3 button on the enhanced  
Access the previous playlist  
remote.  
NOTe The speaker system is compatible with the alarm clock and sleep  
timer features built into select iPhone and iPod models. For these features to  
work properly, the speaker system must be connected to a wall outlet. See  
the user guide for iPhone or iPod for details on how to access these features.  
Press the P4 button on the enhanced  
Access the next playlist  
remote.  
11  
 
Charging Your iPhone or iPod  
Whenever your iPhone or iPod is docked and your Altec Lansing inMotion  
Max speaker system is plugged into an AC outlet, your iPhone or iPod is  
charging (until fully charged) – even if the speaker system is switched off.  
how to Store Preset Stations  
Your Altec Lansing speaker systems enhanced remote enables you to  
program up to 4 FM station presets:  
1
2
3
Tune to the station you wish to store.  
Listening to the FM Radio  
While in “FM” mode, use the and buttons on your speaker  
system or enhanced remote to tune to the desired station.  
1
Plug the FM radio antenna into the  
speaker system’s FM ANTENNA  
jack.  
Store the station.  
Press and hold the P1, P2, P3 or P4 button on the enhanced remote  
for a few seconds. You can store one FM station in each preset.  
The jack is located on the back of the  
system.  
To store other stations, repeat the above steps.  
2
Extend the FM antenna wire fully  
for best FM reception. Also, do  
not strip, alter or attach to other  
antennas.  
how to Recall Preset Stations  
1
2
3
Make sure you are in “FM” mode.  
If you’re not in “FM” mode, press the  
speaker system or enhanced remote until the  
button on your  
appears on the LCD.  
3
4
Select “FM” mode.  
Press the  
remote until the  
button on your speaker system or enhanced  
appears on the LCD.  
Press a PRESET button (P1, P2, P3 or P4) on the enhanced  
remote.  
The radio will tune to your preset station.  
Tune to the station you want to listen to.  
Use the and buttons on your speaker system or enhanced  
remote to tune in the desired station. Press and hold these same  
buttons to find the next clear FM station.  
Adjust the volume.  
Use the + and – buttons on the Altec Lansing speaker system  
to adjust the system volume. Or, use the + and – buttons on the  
enhanced remote.  
5
Adjust the volume.  
Use the + and – buttons on the Altec Lansing speaker system  
to adjust the system volume. Or, use the + and – buttons on the  
enhanced remote.  
12  
 
Listening to a Non-docking iPod  
or Other Portable Audio Device  
Maintaining Your Speaker System  
Place your speaker system on a level surface away from sources of direct  
sunlight or excessive heat.  
If you have a non-iPod MP3 player or other non-docking portable audio  
device, you can enjoy it through your Altec Lansing inMotion Max speaker  
system as well. Just connect it via the AUX jack. Heres how:  
Protect your furniture with a cloth or other protective material when placing  
your speaker system on a natural wood or lacquered finish.  
1
2
Locate a 3.5 mm stereo cable  
(not included).  
Clean your speaker system with a soft cloth moistened only with mild soap  
and water. Stronger cleaning agents, such as benzene, thinner or similar  
materials, can damage the surface of the unit.  
Plug one end of the stereo cable  
into your device.  
Your device should have either a  
headphone or LINE OUT jack for you  
to plug into.  
3
4
Plug the other end of the stereo  
cable into your speaker system’s  
AUX jack.  
The AUX jack is located on the back of the unit.  
Select “AUX” mode.  
Press the  
button on your speaker system or the enhanced  
remote until the AUX icon appears on the speaker systems LCD.  
5
6
Turn on your device and start it playing.  
Adjust the volume.  
Use the + and – buttons on the speaker system to adjust the volume.  
Or, use the + and – buttons on the enhanced remote.  
NOTe You may need to adjust the device volume also. Your devices  
volume should be set to approximately ¾ volume.  
7
When you are finished listening to your portable audio device,  
please remember to turn both it and your speaker system off  
to conserve electricity.  
13  
 
Troubleshooting  
Symptom  
Possible Problem  
Solution  
AC adapter isn’t plugged into a wall outlet  
or the connector isn’t plugged into the  
power supply jack on the back of the  
speaker system  
Plug the AC adapter into a wall outlet and plug the connector into the power  
supply jack on the back of the speaker system.  
Speaker system doesn’t  
respond (no power)  
Wall outlet is not functioning  
Plug another device into the same outlet to confirm the outlet is working.  
The rechargeable battery isn’t charged.  
The power isn’t turned on.  
Recharge the battery. (See the Getting Started section for details.)  
Turn on the speaker system by pressing the button. The indicator light  
turns on.  
Using the wrong adapter for iPhone or  
iPod or no adapter  
Make sure the adapter is the proper fit for your iPhone or iPod.  
iPhone or iPod doesn’t dock  
properly  
iPhone or iPod didn’t install properly  
iPhone or iPod is not installed properly  
Your iPhone or iPod software is too old  
iPhone or iPod is locked up  
Remove your iPhone or iPod from the dock and check for obstruction on the  
connectors in the dock and on your iPhone or iPod. Then reseat it in the dock.  
Remove your iPhone or iPod from the dock and check for obstructions on  
the connectors in the dock and on your iPod. Then reseat it in the dock.  
Upgrade software on your iPhone or iPod. For details visit  
iPhone or iPod doesn’t  
respond to the speaker  
system  
Please make sure your iPhone or iPod is working properly before docking into  
the unit. Please refer to your iPhone or iPod manual for details.  
Using 1st- or 2nd-generation iPod, iPod  
Your speaker system cannot control those iPods or other devices.  
shuffle or other devices  
14  
 
Troubleshooting  
Symptom  
Possible Problem  
Solution  
iPhone or iPod is not installed properly  
Remove your iPhone or iPod from the dock and check for obstructions on the  
connectors in the dock and on your iPhone or iPod. Then reseat it in the dock.  
iPhone or iPod is locked up  
Please make sure your iPhone or iPod is working properly before docking into  
the unit. Please refer to your iPhone or iPod manual for details.  
iPhone or iPod didn’t charge  
AC adapter isn’t plugged into a wall outlet, Plug the AC adapter into a wall outlet and plug the connector into the supply  
or the connector is not plugged into the  
power supply jack on the back of the  
speaker system  
jack on the speaker system.  
Volume level is set too high  
Decrease the volume.  
Sound source is distorted  
If the iPhone or iPod original sound source (MP3) is of poor quality, distortion  
and noise are easily noticed with high-power speakers. Try a different audio  
source such as a music CD.  
Sound is distorted  
Battery is weak  
Replace current battery with a new battery.  
Enhanced remote doesn’t  
work  
Enhanced remote is not pointed toward  
the speaker system  
Point the enhanced remote toward the Altec Lansing speaker system and  
move within 10 feet of the unit.  
No sound from the AUX  
device, such as an MP3  
player or CD player  
Volume on the device is set too low  
Increase the volume on the device to approximately ¾ full volume.  
Source selector is not set to AUX  
Set source selector to AUX.  
connected to the AUX jack  
15  
 
Troubleshooting  
Symptom  
Possible Problem  
Solution  
Static electricity, momentary interruption of 1. Disconnect the AC adapter cable plug from the speaker systems jack.  
The speaker system exhibits  
erratic or unexpected  
behavior. Controls do not  
function.  
power or abnormal operating conditions  
may be responsible.  
2. Close the stand on the back of the speaker system.  
3. Wait 20–30 seconds.  
4. Open the stand on the back of the speaker system.  
5. Reconnect the AC adapter cable plug to the speaker systems jack.  
16  
 
Warranty  
ALTec LANSING ONe-yeAR LIMITeD WARRANTy  
What Does the Warranty cover?  
DISPOSAL OF OLD eLecTRIcAL AND eLecTRONIc eqUIPMeNT  
This symbol on the product or on its packaging indicates that this product shall not be  
treated as household waste. Instead it shall be handed over to the applicable collection  
point for the recycling of electrical and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences for the  
environment and human health, which could otherwise be caused by inappropriate waste  
handling of this product. The recycling of materials will help to conserve natural resources.  
For more detailed information about recycling of this product, please contact your local city office or your  
household waste disposal service.  
Altec Lansing warrants that its products shall be free from defects in materials or workmanship, with the  
exceptions stated below.  
What Is the Period of coverage?  
This warranty runs for one year from the date of purchase. The term of any warranties implied by law shall  
expire when your limited warranty expires. Some states and/or Member States in the European Union do  
not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
What Does the Warranty Not cover?  
This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper  
installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended  
or faulty equipment. (For information on proper installation, operation and use consult the manual  
supplied with the product. If you require a replacement manual, you may download a manual from  
www.alteclansing.com.) Also, consequential and incidental damages are not recoverable under this  
warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitation or exclusion may not apply to you.  
What Will Altec Lansing Do to correct the Problem?  
Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or  
workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec  
Lansing may replace your product with a similar or better Altec Lansing product.  
how to Get Warranty Service  
To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty  
period by email ([email protected]). You must include in your email, your name, address,  
email address, telephone number, date of purchase and a complete description of the problem you  
are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at  
1-800-ALTEC88. Please be prepared to provide the same information. If the problem appears to be  
related to a defect in material or workmanship, Altec Lansing will provide you a return authorization and  
instructions for return shipment. Return shipments shall be at the customers expense, and the return  
must be accompanied by the original proof of purchase. You should insure the shipment as appropriate  
because you are responsible for the product until it arrives at Altec Lansing.  
how Will State Law Affect your Rights?  
This warranty gives you specific legal rights, and you may also have other rights, which vary from state  
to state. Please note that in the European Union, you as a consumer might have other legal rights under  
national legislation of European Union Member States governing the sale of Altec Lansings goods. Those  
rights are not affected by this guarantee.  
The above limited warranties and remedies are sole warranties and remedies available to purchaser, if, and  
to the extent, valid and enforceable under the applicable law.  
17  
 
heADqUARTeRS 535 Rte. 6 & 209, Milford, PA 18337-0277 • 800-ALTEC-88. 570-296-4434. • Fax 570-296-6887  
eUROPe 13 Rue Beaumont, L-1219 Luxembourg, Luxembourg  
ASIA/PAcIFIc 23/F, Office Tower, Shun Hing Square Diwang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen, China 518008  
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance  
standards.  
“Works with iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple  
performance standards.  
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.  
Patents pending.  
©2008 Plantronics, Inc. All rights reserved.  
ALTEC, ALTEC LANSING, the Altec Lansing logo, the horn design, inMotion, and iMT702 are trademarks or registered trademarks of Altec Lansing, a division of Plantronics, Inc.  
Plantronics, the logo design, and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.  
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.  
iPhone is a trademark of Apple, Inc.  
All other trademarks appearing herein are the property of their respective owners.  
Designed by Altec Lansing in the USA. Made in China.  
A12896 R04  
 

AEG Coffeemaker Coffee Machines User Manual
Allied Telesis Network Card AT iMG646MOD User Manual
Alpine Universal Remote RUE 4190 User Manual
Amana Clothes Dryer electronic dryer User Manual
Amana Refrigerator ATB1822MR User Manual
Apple Network Card StyleWriter EtherTalk User Manual
Apple Network Router ME918LL A User Manual
Axis Communications Security Camera M1114 User Manual
BB Electronics TV Converter Box EIR102 User Manual
Eureka Tents Tent Equinox 6 User Manual