RETROSPECT COLLECTION®
PEDESTAL SINK
FIRE CLAY
RETROSPECT COLLECTION® PEDESTAL SINK
• Authentically styled rectangle pedestal
• Made from fine fireclay
• Generous deck area for toiletries
• Hidden front overflow
• Supplied with mounting kit
• Right Height™ for greater comfort
• Part of design matched Retrospect Collection®
❏ 0282.800 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
27" x 19-3/4" x 36"
(686 x 502 x 914mm)
Separate Components:
13-3/4"
3 Holes
❏ 0282.008 Pedestal top 8" (203mm) centers
❏ 0066.000 Pedestal only
(349mm)
1-3/8" (35mm) Dia.
8"
(203mm)
FINISHED WALL
3-3/8"
(86mm)
Bowl sizes:
9"
(229mm)
15-1/2" (394mm) wide
12" (305mm) front to back
6-1/8" (156mm) deep
15"
(381mm)
19-3/4"
(502mm)
1-3/4" DIA.
STD. DRAIN
OUTLET
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
PED TOP
OUTLINE
27"
(686mm)
• CAN/CSA B45 Series
8-1/8"
7-1/4"
(184mm)
TO BOTTOM
OF DRAIN OUTLET
(206mm)
8"
3/8" (10mm) DIA.
(203mm)
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTRES
SUPPLIES
AS REQ'D
36"
(914mm)
1-1/4 O.D.
WASTE
To Be Specified:
❏ Color: ❏ White
❏ Recommended Faucet: 2373.701
❏ Faucet Finish:
24"
*
(610mm)
28-1/4"
(718mm)
1-1/4" O.D.
TAILPIECE
22"
*
(559mm)
❏ Supplies:
❏ 1-1/4" Trap:
FINISHED
FLOOR
PEDESTAL
SIDE SECTION
3/8" (10mm) DIA.
BASE ANCHOR
SCREW HOLE
CENTER
9-7/8"
(251mm)
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J8
© 2008 AS America Inc.
Revised 2/08
|