American Standard Indoor Furnishings 0554012 User Manual

ANTIQUITY™  
COUNTERTOP SINK  
VITREOUS CHINA  
BARRIER FREE  
ANTIQUITY™ COUNTERTOP SINK  
• Turn-of-the-century detailing on countertop sink  
• Made from vitreous china  
• Self-rimming with cutout template supplied  
• Front overflow  
• Faucet ledge (faucet not included)  
0558.017 Faucet holes on 8" (203mm) centers  
0554.012 Faucet holes on 4" (102mm) centers  
(illustrated)  
Nominal Dimensions:  
616 x 457mm  
(24-1/4" x 18")  
FINISHED WALL  
OR SPLASHBACK  
Bowl sizes:  
432mm (17") wide  
267mm (10-1/2") front to back  
140mm (5-1/2") deep  
610mm  
(24)  
70mm  
(2-3/4)  
102mm  
(4)  
OPTIONAL  
67mm  
(2-5/8)  
183mm  
(7-3/16)  
Compliance Certifications -  
Meets or Exceeds the  
Following Specifications:  
• ASME A112.19.2M for  
DRAWING FOR  
203mm  
(8)  
MIN.  
DIMENSIONAL  
PURPOSES ONLY.  
IT IS NOT AN EXACT  
REPRESENTATION.  
457mm  
(18)  
C/L  
845mm  
(33-1/4)  
Vitreous China Fixtures  
686mm  
(27)  
MIN.  
616mm  
(24-1/4)  
152mm  
(6)  
MAX.  
SEALING  
COMPOUND  
19mm  
(3/4)  
COUNTERTOP (BY OTHERS)  
BARRIER FREE  
CLEARANCE  
229mm  
(9)  
178mm  
(7)  
MIN.  
*
248mm  
(9-3/4)  
*343mm  
203mm  
(8)  
SUPPLIES  
AS REQ'D  
(13-1/2)  
178mm  
(7)  
1-1/4 O.D.  
WASTE  
787mm (31)  
845mm (33-1/4)  
FINISHED FLOOR  
1-1/4 O.D  
TAILPIECE  
To Be Specified:  
Color: White Bone Linen  
*Faucet:  
Faucet Finish:  
Supplies:  
1-1/4" Trap:  
NOTES:  
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE  
* See faucet section for additional models available  
*
SUGGESTED.  
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE  
TEMPLATE SUPPLIED WITH SINK.  
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED  
SEPARATELY.  
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES  
AND ANSI A117.1 ACCESSIBLE AND USABLE  
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.  
SEALING COMPOUND SUPPLIED BY OTHERS.  
IMPORTANT: Dimensions of fixtures are nominal and may vary within the  
range of tolerances established by ANSI Standard A112.19.2.  
These measurements are subject to change or cancellation. No responsibility  
is assumed for use of superseded or voided pages.  
Install lavatory 864mm (34") from finished floor.  
Lavatory installed 70mm (2-3/4") minimum from front edge  
of countertop provides 686mm (27") knee clearance area.  
J29  
© 2008 AS America Inc.  
Revised 2/08  
 

3M Snowshoes 747 User Manual
Abocom Network Card WMB2000 User Manual
ACP EP Memory Camera Accessories SDHC User Manual
Allied Telesis Computer Hardware x900 User Manual
Alloy Computer Products Network Card NuDOG MPT User Manual
Alvin Indoor Furnishings XV 4 XB User Manual
Amana Microwave Oven AMC5101AAB W User Manual
Atlantis Land Switch A07 ES4612 User Manual
Axor Plumbing Product 10820001 User Manual
Beckett Water Gardening Outdoor Fountain PK35 User Manual