Audiovox Remote Starter CA 6150 User Manual

PROFESSIONAL  
SERIES  
CA 6150  
Owner’s Guide  
Vehicle Security and  
Remote Start System  
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is  
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR  
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.  
2009 Audiovox Electronics Corporation. All rights reserved.  
1
 
Using Your Remote Control  
Arming the Security System  
To arm the system, exit the vehicle, close all doors, then press the button. The  
parking lights will flash 2 times, indicating the system is armed, has locked the  
doors (if equipped and connected) and activated the starter disable feature. The  
LED status indicator will blink steadily, once per second.  
NOTE: The system is defaulted with Silent Choice enabled, which requires a  
second press of the  
vehicle.  
button to activate an audible arming response from the  
Passive Arming Bypass  
If passive arming is enabled on your system, while the system is disarmed, press  
+
, the system will respond with 1 chirp and the LED will turn on. The  
security system will remain in this temporally bypassed state for as long as you  
wish. To exit passive bypass, press the  
to normal status.  
or button and the system will return  
Bypassing The Shock Sensor  
To arm the system and ignore the shock sensor press  
button, then within 5  
seconds press , the system will respond with 1 long chirp.  
+
NOTE: The system will only change the shock sensor setting for one arm cycle  
and will be defaulted back to normal operation the next time the system is armed.  
Hidden Alarm Function  
Press the  
button first, within 3 seconds press the  
button to activate the  
hidden alarm function. The security system will arm with “Hidden Alarm Function”  
in which the siren / horn will be silenced if the system is triggered.  
Disarming the Security System  
To disarm the system press the button. The parking lights will flash 1 time,  
indicating the system is disarmed and has unlocked the doors (if equipped and  
connected).  
NOTE: The system is defaulted with Silent Choice enabled, which requires a  
second press of the button to activate an audible arming response from the  
vehicle.  
*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more  
than 2 seconds.  
2009 Audiovox Electronics Corporation. All rights reserved.  
3
 
Two Stage Door Unlock (Optional)  
If this feature is enabled on your system, pressing the  
button one time will  
unlock only the driver’s door. Press again within three seconds to unlock the  
remaining doors.  
Valet Mode  
To engage valet mode:  
1. Turn the ignition key to the ON position.  
2. Press and hold the emergency override button.  
3. The LED will light solid indicating that the system is in valet mode.  
When valet mode is activated the status LED will light solid, and all security and  
remote start functions will be disabled.  
To disengage valet Mode:  
1. Turn the ignition key to the ON position.  
2. Press and release the emergency override button.  
3. The LED will turn off indicating that the system has exited valet mode.  
Manually Overriding the Security System  
Your system can be disarmed without the use of the transmitter. This is  
necessary, since you will need the ability to operate your vehicle if the transmitter  
is lost or its battery fails. To by-pass the alarm system;  
1. Open the vehicle door. The alarm will sound.  
2. Turn the ignition key to the ON position.  
3. Within 5 seconds, press and release the valet push button switch.  
The alarm system will stop sounding and enter the (by-passed) mode. You can  
now start and operate the vehicle normally.  
Activating the Trunk Release Feature (Optional)  
If this feature is enabled on your system, pressing and holding the button for 3  
seconds will open the vehicle’s trunk or hatch.  
Activating Optional AUX 1 (Optional)  
If this feature is enabled on your system, pressing the  
and buttons  
simultaneously will activate an optional feature. This feature can be programmed  
for a wide range of functions like power window or sunroof automation, please  
consult your installing dealer to determine the functionality of your system.  
4
2009 Audiovox Electronics Corporation. All rights reserved.  
 
Using the Progressive Car Finder Feature  
Press the  
button to locate your vehicle. The system will sound 5 times at low  
volume, increasing in volume each time the button is pressed.  
Using the Personal Protection Alarm (Panic)  
Press and hold the  
button for 3 seconds to activate the personal protection  
alarm. During panic mode, the normal function of the transmitter buttons will be  
suspended. The transmitter’s and buttons can be used to lock and unlock the  
door (if the option is installed). To stop the alarm, press and hold the  
button on  
the transmitter again for 3 seconds. The system will automatically stop after 30  
seconds.  
Eliminating Arm / Disarm Notification Chirps  
System ARM/DISARM chirps can be toggled ON or OFF without entering the  
programming feature banks.  
1. Turn the ignition ON then OFF.  
2. Press and release the valet/programming button 3 times. The system will  
respond with 1 chirp for ON or 2 chirps for OFF.  
Car Jack Mode  
This feature must be turned on in system programming, please consult your  
installing dealer.  
Triggering Car Jack mode: While the ignition is ON and press and hold  
seconds, the parking lights will flash 1 time and the system will act as follows;  
1. 50 seconds after being triggered the siren will chirp for 15 seconds,  
+
for 2  
during this 15 seconds you will be alerted to push the valet button to turn  
off Car Jack mode. If Car Jack mode is not turned off at this time it will  
advance to the next step.  
2.  
Following the 15 second chirps (total time now 65 seconds) the siren  
will go into full sound and the parking lights will start flashing.  
3. 90 seconds after trigger in, addition to the siren and parking lights, the  
system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS  
STATE UNTILTHE BATTERY IS DEPLETED.  
OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF  
then On and press the valet button within 10 seconds.  
2009 Audiovox Electronics Corporation. All rights reserved.  
5
 
Using Your Remote Vehicle Starter  
Remote Starting Your Vehicle  
To activate the remote vehicle start function, press and release the  
button 2  
times within 2 seconds. The system will sound, the parking lights will flash 1 time  
and the system will check the vehicle to ensure it is safe to start. If all safety  
parameters are correct, the vehicle will start within 5 seconds. The vehicle’s  
parking lights will turn on (or flash depending on system settings) as a visual  
indication that the vehicle has started and is running. Press and hold the  
for 3 seconds to turn the vehicle off.  
button  
If your vehicle stalls or does not start, the system will pause 5 seconds, then try 2  
more times to start the vehicle (a total of 3 attempts). The system will pause 5  
seconds between each start attempt. If the vehicle does not start after the 3rd  
attempt, the system will abort the remote vehicle start process.  
Entering the Vehicle while it is Running via Remote Vehicle Start  
1. Unlock the vehicle’s doors.  
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!  
3. Insert the key into the ignition switch and turn to the ON or RUN position.  
4. Press the brake pedal. The remote vehicle starter will disengage and the  
vehicle will operate normally.  
Preheating or Precooling the Vehicle’s interior  
Before exiting the vehicle, set the temperature controls to the desired setting and  
operation. After the system starts the vehicle, the heater or air conditioner will  
activate and heat or cool the vehicle’s interior to your setting.  
Using the “Quick-stop” Feature  
If you want to make a short stop and keep your vehicle running (to keep the  
interior warm or cool), the quick-stop feature allows you to do this while keeping  
your vehicle secure and your keys with you.  
To engage quick stop:  
1. Stop the vehicle and place the transmission in PARK.  
2. With your foot off the brake pedal, press and release the  
button 2  
times within 2 seconds. The LED will flash 3 times to confirm quick stop is  
entered.  
3. Remove the keys from the ignition and exit the vehicle. Press the  
button to lock the vehicle’s doors if desired.  
Note: Do not leave children or animals unattended in the vehicle when using the  
quick-stop feature.  
6
2009 Audiovox Electronics Corporation. All rights reserved.  
 
Operating the 2 / 3 Hour Start Up Timer Mode  
The system has the ability to start the vehicle every 2 or 3 hours for a 48 hour  
period. This feature is especially useful in cold climates where the only means to  
keep the engine and engine fluids warm is to periodically start the engine. The  
default setting is 3 hour, Selection between 2 or 3 hour is made in option  
programming.  
WARNING!  
Be certain that the vehicle is outdoors before using this or any remote starting  
device. A running engine produces dangerous carbon monoxide fumes which can  
be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle  
if it is garaged.  
To begin the 2 / 3 hour start up timer mode:  
1.  
2.  
3.  
Turn the vehicle’s ignition ON then OFF.  
Press and hold the valet button.  
Press the  
button 4 times, the system will chirp 2 times and flash the  
parking lights 4 times.  
4. Release the valet button.  
To exit the 2 / 3 hour start up timer mode:  
1.  
Turn the vehicle’s Ignition ON.  
OR  
1.  
Activate the remote vehicle start feature using the remote control.  
Turbo Timer  
This option will keep the engine running to allow the vehicle’s turbo to properly cool  
down before shutting the engine off.  
To engage the Turbo Timer feature:  
1.  
With the vehicle running via the ignition key and your foot off of the  
brake pedal.  
2.  
Engage the vehicle’s parking brake and press the and  
buttons simultaneously.  
3.  
The vehicle’s parking lights will turn on to verify the Turbo Timer  
feature has been activated.  
4. Turn the ignition key OFF, the vehicle will continue to run until the pre-  
programmed time has elapsed (1, 3, or 5 minutes)  
To disengage the turbo timer feature, press the vehicle’s brake pedal.  
2009 Audiovox Electronics Corporation. All rights reserved.  
7
 
Operating the Daily Start Timer  
The system has the ability to start your vehicle based on a 24-hour countdown  
timer. This feature requires a two-part activation sequence. From the remote,  
pressing both the  
&
buttons together will activate the 24 hour countdown  
timer (the vehicle will start 24 hours from this time). Next, When you are finished  
operating the vehicle for the day, perform the following steps to complete the  
process.  
1.  
2.  
Turn the ignition ON/OFF (vehicle must be disarmed).  
Within 10 seconds, while pressing the brake, press and release the  
button twice.  
3.  
The vehicle will emit 2 chirps.  
Remote Start Safety Features  
For safety and security reasons, the system will shutdown or prevent the remote  
vehicle starter from activating if any of the following occur:  
1.  
2.  
The vehicle hood is open.  
The brake pedal is pressed prior to turning the ignition key to the ON  
position.  
3.  
4.  
The engine is over-revved (tach checking only).  
Valet mode is active.  
8
2009 Audiovox Electronics Corporation. All rights reserved.  
 
LED and Siren/Horn Indications  
LED Display Indications  
LED  
Function  
OFF  
DISARMED  
SLOW FLASH  
FAST FLASH  
ON (SOLID)  
ARMED  
PASSIVEARMING  
VALET MODE  
2 FLASH... PAUSE  
3 FLASH... PAUSE  
4 FLASH... PAUSE  
5 FLASH... PAUSE  
ZONE 2 TRIGGER, HOOD/TRUNK  
ZONE 3 TRIGGER, DOOR  
ZONE 4 TRIGGER, SHOCK  
ZONE 5 TRIGGER, IGNITION  
Siren/Horn Indications  
Chirps  
Function  
1
2
3
4
5
DISARM  
ARM  
DOORAJAR UPONARMING  
DISARM / TRIGGERED  
CAR LOCATOR  
Parking Light Flash Indications  
Flashes  
Function  
1
DISARM  
2
ARM  
3
DISARM / TRIGGERED  
CAR LOCATOR  
REMOTE STARTED  
5
ON (SOLID)  
2009 Audiovox Electronics Corporation. All rights reserved.  
9
 
Transmitter Button Functions  
Replacing Remote Control Batteries  
1-Way 4 Button Remote Control:  
The batteries (model CR2016) inside each remote control should last approximately  
1 year under normal use. When the batteries become weak you will notice the  
remote control range (the distance from the vehicle the remote control will work)  
deteriorate and the small LED on the remote control will dim. To replace the remote  
control batteries:  
1. Remove 3 screws and disassemble the halves of the remote control.  
2. Remove the old batteries, observing the +/- symbols on the batteries and  
replace with new CR2016 batteries.  
3. Reassemble the halves of the remote control and install the 3 screws.  
4. Test operation of the remote control.  
10  
2009 Audiovox Electronics Corporation. All rights reserved.  
 
Code Systems, Inc. Limited Lifetime Warranty  
Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE  
vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as  
provided below) should this Product under normal use and conditions, be proven defective in  
material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI-  
NALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for  
parts directly related to repairs of the defect(s).  
Switches, indicator lights, and transmitter cases are similarly warranted to the original  
purchaser for a period of one (1) year from the date of purchase of the Product.  
CODE accessories, sold separately, are covered by the applicable warranty accompa-  
nying the accessory.  
This warranty is non-transferable, non-assignable and is voided when: (1) the Product is  
removed from the vehicle in which it was originally installed; or (2) the vehicle in which the Product  
was originally installed is transferred to another party.  
This warranty does not apply to any product damaged by accident, physical or electrical  
abuse, improper installation, alteration, or use contrary to its intended function, fire, flood, or other  
natural acts.  
In order for the Product to be repaired or replaced under the terms of this warranty, the  
defective Product must be returned to an authorized CODE dealer and accompanied by a copy of  
the retail sales receipt. The date of purchase and year, make and model of the vehicle in which the  
Product was originally installed must be clearly indicated on the sales receipt.  
This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED  
OR IMPLIED. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN WARRANTY. IN NO CASE SHALL CODE BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WAR-  
RANTY, EXPRESS OR IMPLIED, WHATSOEVER.  
CODE does not warrant that the Product cannot be compromised or circumvented. THE EXTENT OF  
CODE’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT SHALL CODE’S LIABILITY EXCEED THE PURCHASE  
PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLATION  
LABOR.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages, so the above limitation may not apply to you. This warranty gives you specific legal  
rights and you may also have other rights which vary from state to state  
2009 Audiovox Electronics Corporation. All rights reserved.  
11  
 
Audiovox Electronics Corporation.  
Customer Service 1-800-421-3209  
WWW.CODE-ALARM.COM  
FCC COMPLIANCE  
This device complies with Part 15 of the FCC rules and with RSS-210 of  
Industry Canada. Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received, including any interference  
that may cause undesired operation.  
Warning!  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
12  
2009 Audiovox Electronics Corporation. All rights reserved.  
 

Abit Computer Hardware KV 85 User Manual
AEG Washer L 87480 FL User Manual
Aiphone Home Security System KA DGR User Manual
Airstream Smoke Alarm NTERSTATE User Manual
Aiwa CRT Television TV A2115 User Manual
Allied Telesis Network Card AT WCU200G User Manual
Amana Air Conditioner 18M23TB User Manual
Atlantic Car Video System 240 DVD User Manual
Audiovox Automobile Alarm TSP 575 User Manual
Avocent Personal Computer 3008 3016 User Manual